Play in deck bearigs

IHC Cub Cadet Forum -- Questions and answers to all of your Cadet related issues.

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.

Play in deck bearigs

Postby wagonmaster » Sun Dec 02, 2012 6:51 pm

One of my 147 mower decks has a liittle more play in the bearings than i would like. Is there a way to adjust or shim them up a little.
wagonmaster
 
Posts: 14
Joined: Tue May 01, 2012 10:22 pm
Location: Corning NY
Zip Code: 14830
Tractors Owned: 108
147
1969 154
1971 154

Re: Play in deck bearigs

Postby Eugene » Sun Dec 02, 2012 9:05 pm

Short answer is Yes. But you need to know your deck number. Look up the exploded parts diagrams for your deck and print out with the part numbers.

The answer may be as simple as adding a flat washer under the lock washer and nut on top of the spindle.

If this deck was previously owned, suggest disassembling each spindle and check for missing, damaged, or misplaced parts. Common occurrence from my experience. Also found different style spindles on same deck. Even found a spindle where someone had hack sawed a piece of black pipe to use as a spacer.
I have an excuse. CRS.
Eugene
Team Cub Mentor
Team Cub Mentor
 
Posts: 12525
Joined: Fri Jul 02, 2004 9:52 pm
Location: Mo. Linn
Zip Code: 65051
Circle of Safety Award
Circle of Safety: Y

Re: Play in deck bearigs

Postby gitractorman » Mon Dec 03, 2012 8:37 am

Also, you need to check the play in the bearing with the blades attached and tightened down. On most mower spindles, if you remove the blade, it releases pressure on the spindle and some play in the bearing is apparent. Given the age of that deck though, I would probably suggest tearing them apart and going through them.
1951 Farmall Cub, Cub Cadets 102, 104, 1811, 1864, Simplicity Legacy XL 4x4 Diesel with FEL, 60" mower, 50" Tiller
User avatar
gitractorman
5+ Years
5+ Years
 
Posts: 2080
Joined: Mon Oct 24, 2005 11:35 am
Location: Grand Island, NY
Zip Code: 14072
eBay ID: toysforjake
Tractors Owned: Lots of Cub Cadets!
1951 Farmall Cub
1977 IH Cub
1966 IH Cub
1965 IH Lo Boy
1949 Farmall Cub
Several IH 154 Lo Boys
1979 IH 184 Lo Boy
Simplicity 4416 Sovereign
Simplicity Conquest
Simplicity Legacy 4x4 Diesel
Circle of Safety Award
Circle of Safety: Y

Re: Play in deck bearigs

Postby BigBill » Fri Dec 14, 2012 11:14 pm

I tighten up the nut or bolt were the zerk fitting is first or at least check it. I find some loose. Make sure you grease the zerks too.
I'm technically misunderstood at times i guess its been this way my whole life so why should it change now.
BigBill
5+ Years
5+ Years
 
Posts: 5705
Joined: Sat Jul 22, 2006 5:02 pm
Location: in northern usa
Zip Code: 00000


Return to Cub Cadet Forum

Who is online

Users browsing this forum: No registered users and 2 guests