Removing front wheel

Farmall Cub Forum -- Questions and answers to all of your Cub related issues.

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.

Removing front wheel

Postby redtruckfarm » Mon Dec 10, 2012 6:06 pm

Winter project is beginning. Got the oil drained, new filter with gasket. Going to try to repack front wheel bearings next. Do I need to remove the wheel weights before I try to remove the whole wheel itself? Thanks.
redtruckfarm
 
Posts: 13
Joined: Sun Jul 15, 2012 10:40 am
Zip Code: 98642

Re: Removing front wheel

Postby muleboss » Mon Dec 10, 2012 6:09 pm

Not if you are strong.
muleboss
5+ Years
5+ Years
 
Posts: 754
Joined: Sat Dec 10, 2005 4:31 pm
Location: KS. Burlington
Zip Code: 66839
Circle of Safety Award
Circle of Safety: Y

Re: Removing front wheel

Postby Bob McCarty » Mon Dec 10, 2012 6:25 pm

The front wheel weight weighs about 25 lbs, so it's not a big deal if it's left on. The rear wheel weight on the other hand weighs 150 lbs.

Bob
"We don't need to think more,
we need to think differently."
-Albert Einstein
Bob McCarty
Team Cub Mentor
Team Cub Mentor
 
Posts: 5689
Joined: Tue May 25, 2004 8:02 pm
Location: CO, Longmont
Zip Code: 80501
Circle of Safety Award
Circle of Safety: Y

Re: Removing front wheel

Postby Buzzard Wing » Mon Dec 10, 2012 10:16 pm

May be a little tough to get the cap, cotter and castle nut off, but it's totally up to you.
1971 Cub (Rufus) 1950 Cub (Cathy) 1965 Lo Boy Fast Hitch (Nameless III) 1970 Cub 1000 Loader & Fast Hitch (Lee)
User avatar
Buzzard Wing
Cub Pro
Cub Pro
 
Posts: 10057
Joined: Mon Aug 09, 2004 10:14 pm
Location: RI, Newport
Zip Code: 02840

Re: Removing front wheel

Postby Boss Hog » Mon Dec 10, 2012 10:34 pm

the inside bearings stay on the spindle
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
User avatar
Boss Hog
Cub Pro
Cub Pro
 
Posts: 9826
Joined: Mon Oct 24, 2005 8:35 pm
Location: VA. Randolph
Zip Code: 23962
eBay ID: dmb2613
Circle of Safety Award
Circle of Safety: Y

Re: Removing front wheel

Postby Buzzard Wing » Mon Dec 10, 2012 10:48 pm

Yep, like Boss says (can't get it off without ruining it). There is a good write up with pictures in the Operator's Manual too.
1971 Cub (Rufus) 1950 Cub (Cathy) 1965 Lo Boy Fast Hitch (Nameless III) 1970 Cub 1000 Loader & Fast Hitch (Lee)
User avatar
Buzzard Wing
Cub Pro
Cub Pro
 
Posts: 10057
Joined: Mon Aug 09, 2004 10:14 pm
Location: RI, Newport
Zip Code: 02840

Re: Removing front wheel

Postby beaconlight » Mon Dec 10, 2012 11:05 pm

put wedges between the bolster and the front axle. It is mandatory when jacking the back and good practice when jacking the front. Sort of to keep in practice.
Bill

"Life's tough.It's even tougher if you're stupid."
- John Wayne

" We hang petty thieves and appoint the great ones to public office."
- Aesop
User avatar
beaconlight
Cub Pro
Cub Pro
 
Posts: 7701
Joined: Thu Aug 19, 2004 2:31 pm
Location: NY Staten Island & Franklin
Zip Code: 10314

Re: Removing front wheel

Postby Barnyard » Mon Dec 10, 2012 11:49 pm

Jason, as Bob said, it's no big deal. Go ahead and pull the bolts off and the wheel and weight will come right off. If it has been on for a while you may have to knock it loose with a hammer.

You won't hurt anything at all. It saves you a little time by taking the weight off with the wheel.
It is common sense to take a method and try it. If it fails, admit it frankly and try another. But above all, try something.
- Franklin D. Roosevelt -

Barnyard Bash CubFest May 30th - May 31st, 2014
Click here for info http://www.barnyardbash.com
http://www.Savethecub.com
User avatar
Barnyard
Team Cub
Team Cub
 
Posts: 17920
Joined: Tue Aug 07, 2007 3:39 pm
Location: OH, New Haven (Hamilton County)
Zip Code: 45030
Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100
Circle of Safety Award
Circle of Safety: Y

Re: Removing front wheel

Postby redtruckfarm » Tue Dec 11, 2012 12:00 pm

Thanks folks, both front wheels are off (after some wd-40 and heating each bolt with an acetylene torch), hub cap unscrewed, cotter pin, castle nut, outer bearing, and hub off on each side. Leaving the inner bearing on. On the left wheel, one wheel bolt was complete missing. Is this a specific bolt or can I replace at a decent auto store? Repacking outer bearing this morning. What is the best way to clean parts these days? I don't have a parts cleaner, I was thinking simple wash tub and a diluted formula of Simple Green. I don't have Kerosene. Thanks again for all the feedback.
redtruckfarm
 
Posts: 13
Joined: Sun Jul 15, 2012 10:40 am
Zip Code: 98642

Re: Removing front wheel

Postby ntrenn » Tue Dec 11, 2012 12:52 pm

I just wiped out the 50 year grease and then used kerosene, but brake cleaner, simple green any detergent should do fine. Pack the bearings by hand and rotate them to squeeze the grease into the roller gaps before putting them back on.

While you are there, you might check the steering play at the worm wheel shaft. Both of mine had about 1/4 turn of slop that showed up as vertical movement of the worm wheel shaft. It's about a 10 minute job to unclamp the arm, tighten the worm nut, then reclamp the arm. Took about 75% of my steering play out. Don't get it too tight, as your steering will take Popeye to turn if you do.
ntrenn
Cub Star!!
Cub Star!!
 
Posts: 339
Joined: Tue Apr 17, 2012 7:55 pm
Location: Indiana
Zip Code: 47119
Skype Name: ntrenn
Tractors Owned: 63 Cub 221833 in family since '69
65 Lo-boy 19648 with an un-stuck #4 - it lives!!!
144 Cultivators with disc hillers
193 Plow
42C mower
59L mower mounted on the Fcub
23A Disc - lost possession

Re: Removing front wheel

Postby Stanton » Tue Dec 11, 2012 12:56 pm

redtruckfarm wrote:On the left wheel, one wheel bolt was complete missing. Is this a specific bolt or can I replace at a decent auto store?


It's a 3/8-24 fine threaded bolt. You ought to be able to find one at an auto parts or a well-stocked hardware store.

redtruckfarm wrote:What is the best way to clean parts these days?


I like using Castrol's Super Clean; comes in a purple bottle. Another "purple" product is called Purple Power. I've found it not as powerful as Super Clean, but it's biodegradable and safe for the environment. Try your Simple Green stuff first and see if it does it for you.
User avatar
Stanton
5+ Years
5+ Years
 
Posts: 2354
Joined: Mon Jun 22, 2009 6:56 am
Location: Lone Jack, MO
Zip Code: 64070
Tractors Owned: 1947 Farmall Circle Cub, serial #2116
1948 Farmall Cub, serial #46066
1949 Farmall Cub, serial #65937
Cub-54 Blade
Cub-193 Moldboard Plow
Cub No. 23-A Tractor Disc Harrow
Grosshart Post Hole Digger
Prewitt Conversion Unit
McCormick-Deering No 100 Manure Spreader
Cub-22 mower
1945 Farmall H, serial #213,651
CCC 782, serial #715729
IH #1 Cart
Circle of Safety Award
Circle of Safety: Y

Re: Removing front wheel

Postby Eugene » Tue Dec 11, 2012 1:10 pm

redtruckfarm wrote:What is the best way to clean parts these days? I don't have a parts cleaner.
Depends on the size of the part, parts location, type of crud, and what you can get away with.
I use spray cans of brake cleaner on small individual parts when I only have one or two to clean.
Quart of gasoline in a plastic tub, old paint brush, for larger parts with lots of accumulated crud.
I have a parts washer, kerosene solvent, where I can soak and clean parts.
Pressure sprayer for even larger parts and knocking off the exterior crud.
I have an excuse. CRS.
Eugene
Team Cub Mentor
Team Cub Mentor
 
Posts: 12612
Joined: Fri Jul 02, 2004 9:52 pm
Location: Mo. Linn
Zip Code: 65051
Circle of Safety Award
Circle of Safety: Y

Re: Removing front wheel

Postby redtruckfarm » Tue Dec 11, 2012 2:30 pm

ntrenn wrote:I just wiped out the 50 year grease and then used kerosene, but brake cleaner, simple green any detergent should do fine. Pack the bearings by hand and rotate them to squeeze the grease into the roller gaps before putting them back on.

While you are there, you might check the steering play at the worm wheel shaft. Both of mine had about 1/4 turn of slop that showed up as vertical movement of the worm wheel shaft. It's about a 10 minute job to unclamp the arm, tighten the worm nut, then reclamp the arm. Took about 75% of my steering play out. Don't get it too tight, as your steering will take Popeye to turn if you do.


Not quite sure what you are referring to when you are talking about the "arm". I looked here:
http://www.cleancomputes.com/Cub/Blue%2 ... 20Axle.htm

specifically around page 3-10. Am I to understand I have to completely disassemble the front axle assembly and steering gear housing to do what you are suggesting? This looks like it will take a lot longer than 10 minutes.
redtruckfarm
 
Posts: 13
Joined: Sun Jul 15, 2012 10:40 am
Zip Code: 98642

Re: Removing front wheel

Postby ntrenn » Tue Dec 11, 2012 6:09 pm

Yes, on page 3-12, nut 29 is the one you want to tighten. Somebody here mentioned it, and it works....loosen the clamp nut that's in arm 25, pull the cotter pin out of nut 29, then slip a wrench over the nut. Turn the steering wheel and thread the shaft deeper onto the nut (turn to the right). Takes some back and forth, but there is just enough room to slip a wrench in the opening. Button her back up....Takes 20-25 minutes the first time you do it - less than 10 on the second one if your cotter pin cooperates.
ntrenn
Cub Star!!
Cub Star!!
 
Posts: 339
Joined: Tue Apr 17, 2012 7:55 pm
Location: Indiana
Zip Code: 47119
Skype Name: ntrenn
Tractors Owned: 63 Cub 221833 in family since '69
65 Lo-boy 19648 with an un-stuck #4 - it lives!!!
144 Cultivators with disc hillers
193 Plow
42C mower
59L mower mounted on the Fcub
23A Disc - lost possession

Re: Removing front wheel

Postby Buzzard Wing » Tue Dec 11, 2012 7:21 pm

I am not too fond of water based 'cleaners' on bearings or internal parts, but should be fine if you get it dry. BTW don't use compressed air to dry bearings.....

Lately I have been using 100% biodiesel for parts cleaning. It is a good parts cleaning solvent, supposed to be biodegradable and around here it has a hint of fried clams and donuts!
1971 Cub (Rufus) 1950 Cub (Cathy) 1965 Lo Boy Fast Hitch (Nameless III) 1970 Cub 1000 Loader & Fast Hitch (Lee)
User avatar
Buzzard Wing
Cub Pro
Cub Pro
 
Posts: 10057
Joined: Mon Aug 09, 2004 10:14 pm
Location: RI, Newport
Zip Code: 02840

Next

Return to Farmall Cub

Who is online

Users browsing this forum: Scrivet and 6 guests