Anything that might not belong on the other message boards!
Moderator: Team Cub
1. Keep it clean.
2. Keep the discussion civil.
3. Name calling is not allowed.
Politics and religion are two topics that tend to degenerate into a violation of one of the three simple rules above.
The mods and the site admin reserve the right to "lock" or "delete" any discussion that in our opinion, is "heading in the wrong direction."
MOST of all, be respectful of your fellow Cubber's opinions. Don't expect to change someones belief system from a simple forum on the internet.
13 posts • Page 1 of 1
I've found oil specifically for jacks at places such as Walmart and others.
'60 FH Lo-Boy
'57 FH Cub "Rusty"
'56 FH Cub
(2) '48 Cubs
'75 IH 140 w/1000 loader
C-3 mower, FH Woods 42F, 22 sickle (2), 54A blade, L-54 blade, 194 plow, FH L-38 disk, FH LB disk, 144 cultivators, FH platform carrier
I've just used any 10 weight oil. Has worked so far. (many years) Grump
David Dee Mock-Leonard
Nothing is foolproof to a sufficiently talented fool.
Some days it's not worth chewing through the restraints
I've always used automatic transmission fluid in all my bottle jacks for the following reason. If your adding oil, it went someplace. And that someplace may need to be cleaned up.
Whether on the shop floor or in a tool box on the truck, ATF is high detergent and nearly water soluble making for easy clean up after the jack tips on its side losing oil.
"HAVE ALL YOUR DELIVERIES MADE BY UNION DRIVERS"
I had a log splitter the instructions called for 30 weight oil or hydraulic fluid but which ever one you used keep using the same one and do not change back and forth.
"Life's tough.It's even tougher if you're stupid."
- John Wayne
" We hang petty thieves and appoint the great ones to public office."
Yes, you can buy hydraulic jack oil, but I've always thought it was just hydraulic oil in a small bottle. I just use hydraulic oil, since I generally have a gallon or two on the shelf. I've used ATF in the past and it worked fine as well.
I think you can use many different things, I have even used 30wt non detergent in a pinch. Does make it retract slow in cold weather. LOL I do normally keep a bottle of the jack oil on hand. You can get it most anyplace that sells automotive supplies, even WalMart. With that being said, I believe that for all around best performance and longevity the regular jack oil is probably best, though I do believe the differences are small.
to restrain the people, it is an instrument for the people to restrain the
government lest it come to dominate our lives and interests." Patrick Henry
I use automatic tranny oil, its cheap plus some of these imported jacks leak. Always use a jack stand when using any jack. "DO NOT TRUST ANY JACK BY ITSELF"
I'm technically misunderstood at times i guess its been this way my whole life so why should it change now.
13 posts • Page 1 of 1
Who is online
Users browsing this forum: No registered users and 2 guests