TC Bracket

Fri Feb 08, 2013 8:22 am

I was wandering what year they changed the TC lever bracket from small to bigger. I have the 48 in my shop I notice that the rod that goes from the lever to the unit has a dog leg in it. I thought it was because of the trimmed dash. My 50 Demo has the same set up. The bracket is 2" wide. So I checked my 56 & 59 the bracket is 3" wide. The rod is straight.





You do not have the required permissions to view the files attached to this post.

Re: TC Bracket

Fri Feb 08, 2013 8:31 am

There were two types of hydraulic levers, fixed and then adjustable, according to Raymond's database for the Cub, the lever style changed at S/N 120339, in the parts book the pictures of the component that bolts to the steering wheel support shaft appear to reflect that 2" to 3" dimension change you mentioned.

*edit - added more info

Re: TC Bracket

Wed Feb 13, 2013 7:52 am

Learn something new everyday I guess....thanks!

Re: TC Bracket

Wed Feb 13, 2013 8:28 am

I checked mine, Jeff. 48, short, 57 & 61 long. Are you going to turn the one on that 48 over and install it the proper way?

Re: TC Bracket

Wed Feb 13, 2013 4:59 pm

I will Gary I didn't see that on the control. Thanks