Another Platinum part

Anything that might not belong on the other message boards!

Moderator: Team Cub

Forum rules
1. Keep it clean.
2. Keep the discussion civil.
3. Name calling is not allowed.

Politics and religion are two topics that tend to degenerate into a violation of one of the three simple rules above.

The mods and the site admin reserve the right to "lock" or "delete" any discussion that in our opinion, is "heading in the wrong direction."

MOST of all, be respectful of your fellow Cubber's opinions. Don't expect to change someones belief system from a simple forum on the internet.
ScottyD'sdad
Cub Pro
Cub Pro
501 Club
501 Club
Posts: 6153
Joined: Thu Aug 31, 2006 7:00 pm
Zip Code: 02769
Tractors Owned: 6"F" cubs
5 lo-boys
1 154
1 184
1 IH444
1 Oliver OC3 crawler
1 AC D10
1 IH 100 manure spreader
1 IH model B corn grinder
3 power units
cub demonstrator
Circle of Safety: Y
Location: Ma. Rehoboth

Another Platinum part

Postby ScottyD'sdad » Wed Feb 13, 2013 8:14 am

http://www.ebay.com/itm/RARE-IH-Farmall ... 91973?pt=L
I'll sell all 3 of mine, for that price! Ed
Image
Member of Chapter 18, and National club

Scrivet
5+ Years
5+ Years
501 Club
501 Club
Posts: 2351
Joined: Sun Apr 19, 2009 9:51 pm
Zip Code: 63664
Location: MO, Potosi

Re: Another Platinum part

Postby Scrivet » Wed Feb 13, 2013 9:49 am

I'll bet he used real silver in the 30 second paint job that almost covered everything.

Isn't this from a power unit anyway? They set UNDER the taller hood, right? The parts manual shows the Cub has a long pipe between the manifold and the hood.

User avatar
John *.?-!.* cub owner
Team Cub Guide
Team Cub Guide
501 Club
501 Club
Posts: 21531
Joined: Sun Feb 02, 2003 2:09 pm
Zip Code: 63664
Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
Location: Mo, Potosi

Re: Another Platinum part

Postby John *.?-!.* cub owner » Wed Feb 13, 2013 11:34 am

think we ought to tell him they were not used on cub tractors, but on the power units for balers and combines? NAH!!
If you are not part of the solution,
you are part of the problem!!!

ScottyD'sdad
Cub Pro
Cub Pro
501 Club
501 Club
Posts: 6153
Joined: Thu Aug 31, 2006 7:00 pm
Zip Code: 02769
Tractors Owned: 6"F" cubs
5 lo-boys
1 154
1 184
1 IH444
1 Oliver OC3 crawler
1 AC D10
1 IH 100 manure spreader
1 IH model B corn grinder
3 power units
cub demonstrator
Circle of Safety: Y
Location: Ma. Rehoboth

Re: Another Platinum part

Postby ScottyD'sdad » Wed Feb 13, 2013 3:38 pm

John *.?-!.* cub owner wrote:think we ought to tell him they were not used on cub tractors, but on the power units for balers and combines? NAH!!

Most of these sellers can't be told anything. One, advertising cub engine main bearing caps, need to be told that they are not interchangeable, between engines, because they were line bored, attached to the block, and only fit that block. I can't be bothered, telling him! (I'm sure he'll say I'm wrong) Ed
Image
Member of Chapter 18, and National club


Return to “Off Topic”

Who is online

Users browsing this forum: No registered users and 2 guests