Eliminating "stake" spots from final seal retianer

Farmall Cub Forum -- Questions and answers to all of your Cub related issues.

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.

Eliminating "stake" spots from final seal retianer

Postby Dale Finch » Tue Mar 12, 2013 10:07 am

I am in the process of replacing seals in a "new" final for my '55 cub, and when I removed the seal for the outer axle from its retainer...#15...it had been staked. What is the easiest way to eliminate these raised stake spots so the new seal is not damaged when installed? The inside radius of the retainer is a bit tight fo most tools.
http://www.cleancomputes.com/Cub/Cub%20Parts%20Manuals/TC-37F%20Revision%202%20(09-70)//Chassis/Page-160.jpg

Anyone have experience with this? I do have a dremel tool...maybe something with that? Thanks!
Dale Finch
User avatar
Dale Finch
501 Club
501 Club
 
Posts: 1388
Joined: Tue Apr 27, 2010 11:34 am
Location: NC, Chapel Hill
Zip Code: 27517
Tractors Owned: '52 Cub "Bobbie"
'55 Cub "Bertha"
'55 Cub "Ben"
'48 Super A "Bubba"
Circle of Safety Award
Circle of Safety: Y

Re: Eliminating "stake" spots from final seal retianer

Postby Former Member » Tue Mar 12, 2013 10:14 am

Yep, support our site sponsors and get a new unit from TM Tractor parts

http://www.tmtractor.com/new/fr/393fp.htm
Image
Former Member
5+ Years
5+ Years
 
Posts: 6416
Joined: Tue Jan 29, 2008 10:56 pm
Zip Code: 00000
Circle of Safety Award
Circle of Safety: Y

Re: Eliminating "stake" spots from final seal retianer

Postby Boss Hog » Tue Mar 12, 2013 10:22 am

I have a few of the retainers if you need one
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
User avatar
Boss Hog
Cub Pro
Cub Pro
 
Posts: 9805
Joined: Mon Oct 24, 2005 8:35 pm
Location: VA. Randolph
Zip Code: 23962
eBay ID: dmb2613
Circle of Safety Award
Circle of Safety: Y

Re: Eliminating "stake" spots from final seal retianer

Postby CapeCodCubs » Tue Mar 12, 2013 11:18 am

What is a stake spot?
Image
CapeCodCubs
5+ Years
5+ Years
 
Posts: 2575
Joined: Fri Jan 11, 2008 5:30 pm
Zip Code: 02747
Tractors Owned: .
1948 F Cub Fast hitch
1949 F Cub
!950 F Cub Fast hitch

10 FastHitch implements
tons' of cultivating and planting stuff
Cub Middlebuster, Cub bean harvester
NOS Planet Jr. planter
172 planter, large combo hopper, 101A fertilzer hopper
Mott flail mower

Re: Eliminating "stake" spots from final seal retianer

Postby bob in CT » Tue Mar 12, 2013 11:31 am

CapeCodCubs wrote:What is a stake spot?


Some seals and bearings are staked into location. The Cub PTO is one example. They are usually a close fit, but not close enough to press into a location and stay there. They can move with time including rotate. To stake 2 parts together I use a prick punch and set it in a spot so it will 'catch" some metal from both parts. A bearing is hardened so the goal is to raise up metal to grip the bearing. A rap with a hammer distorts and raises-up/sinks-in enough metal on both parts so there is a little grip between them. I have a bunch of oddball curved files from my father's aircraft engine toolbox that work well cleaning up things like this.
User avatar
bob in CT
Cub Pro
Cub Pro
 
Posts: 5239
Joined: Thu Jun 07, 2007 9:34 am
Location: CT, Manchester
Zip Code: 06040
Tractors Owned: 77 Cub (red); 74 Cub; 52 Cub; 50 Cub ( post-demo)
Circle of Safety Award
Circle of Safety: Y

Re: Eliminating "stake" spots from final seal retianer

Postby CapeCodCubs » Tue Mar 12, 2013 11:43 am

Gotcha...I learned something today.

Thanks
Image
CapeCodCubs
5+ Years
5+ Years
 
Posts: 2575
Joined: Fri Jan 11, 2008 5:30 pm
Zip Code: 02747
Tractors Owned: .
1948 F Cub Fast hitch
1949 F Cub
!950 F Cub Fast hitch

10 FastHitch implements
tons' of cultivating and planting stuff
Cub Middlebuster, Cub bean harvester
NOS Planet Jr. planter
172 planter, large combo hopper, 101A fertilzer hopper
Mott flail mower

Re: Eliminating "stake" spots from final seal retianer

Postby Eugene » Tue Mar 12, 2013 3:56 pm

Dremel
I have an excuse. CRS.
Eugene
Team Cub Mentor
Team Cub Mentor
 
Posts: 12521
Joined: Fri Jul 02, 2004 9:52 pm
Location: Mo. Linn
Zip Code: 65051
Circle of Safety Award
Circle of Safety: Y

Re: Eliminating "stake" spots from final seal retianer

Postby Dale Finch » Tue Mar 12, 2013 5:53 pm

Eugene wrote:Dremel

Actually, that is exactly what I decided to try, and I think it is OK. At least they are above where the seal seats, thus if I took out a tad extra metal, it won't effect the sealing. Whereas, if I took out too little and the seal gets dinged as it passes these spots, it will leak. So before I put the new seal in I will double check. Thanks!
Dale Finch
User avatar
Dale Finch
501 Club
501 Club
 
Posts: 1388
Joined: Tue Apr 27, 2010 11:34 am
Location: NC, Chapel Hill
Zip Code: 27517
Tractors Owned: '52 Cub "Bobbie"
'55 Cub "Bertha"
'55 Cub "Ben"
'48 Super A "Bubba"
Circle of Safety Award
Circle of Safety: Y


Return to Farmall Cub

Who is online

Users browsing this forum: No registered users and 2 guests