ZENITH Carb Float level adjustment procedures

Farmall Cub Forum -- Questions and answers to all of your Cub related issues.

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.

ZENITH Carb Float level adjustment procedures

Postby Chet » Wed Mar 13, 2013 10:20 am

Would an "expert" please refresh my memory on how to adjust the float level on my zenith carb without a float adjusting template, or how to make a template quickly? I have looked at previous post and cannot find a post that fits.
:roll: :roll:
Chet
 
Posts: 28
Joined: Sat Feb 23, 2013 8:31 am
Location: Brooklyn, MISSISSIPPI
Zip Code: 39425
Tractors Owned: Farmall Cub, "Susie-Q" 61617 1948 /Woods 42 Mower, Sickle Mower. 2 gang disc, cultivators
Farmall Cub, "Sadie", 1949 Block Casting 2-3-S Duplex planter,Fert Distr
FarmallCub "Charlene" 22312 1948 Disc Plow, Flail Mower, Grader Blade

Re: ZENITH Carb Float level adjustment procedures

Postby Bob McCarty » Wed Mar 13, 2013 10:45 am

Here's a picture from the GSS-1411 fuel section that should answer your question"Image
Float drop is 3/16" (.19") just as on the IH carb.
Bob
"We don't need to think more,
we need to think differently."
-Albert Einstein
Bob McCarty
Team Cub Mentor
Team Cub Mentor
 
Posts: 5689
Joined: Tue May 25, 2004 8:02 pm
Location: CO, Longmont
Zip Code: 80501
Circle of Safety Award
Circle of Safety: Y

Re: ZENITH Carb Float level adjustment procedures

Postby Chet » Wed Mar 13, 2013 12:17 pm

AHOY BOB....... THANK YOU SO VERY MUCH. I CAN MOVE FORWARD NOW. :D :{_}: CHET SENDS
Chet
 
Posts: 28
Joined: Sat Feb 23, 2013 8:31 am
Location: Brooklyn, MISSISSIPPI
Zip Code: 39425
Tractors Owned: Farmall Cub, "Susie-Q" 61617 1948 /Woods 42 Mower, Sickle Mower. 2 gang disc, cultivators
Farmall Cub, "Sadie", 1949 Block Casting 2-3-S Duplex planter,Fert Distr
FarmallCub "Charlene" 22312 1948 Disc Plow, Flail Mower, Grader Blade


Return to Farmall Cub

Who is online

Users browsing this forum: jpcubs and 6 guests