Set bolt broken on steering knuckle

Farmall Cub Forum -- Questions and answers to all of your Cub related issues.

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
5+ Years
5+ Years
Posts: 31
Joined: Fri May 31, 2013 3:05 pm
Zip Code: 45122

Set bolt broken on steering knuckle

Postby Oldthings » Wed Jun 19, 2013 8:47 pm

A sincere thank you to Eugene and Raymond Durbin on this forum for your help with this. Following their advice, and getting overdosed on fumes from PB Blaster I drilled another minute or two on the stuck bolt this evening. Rapped the other side and the remaining piece just fell out. I had to look 3 times to make sure I was seeing correctly the indentation on the spindle where the tip of the bolt sets. Turns out this had been repaired before using a flat tip bolt and little brazing work underneath the spindle out of sight. That was grinded off and showed no damage. I have been following this forum for a long time and the info I have learned money cannot buy. Thank you again Eugene and Raymond, Ray Mink

User avatar
Cub Pro
Cub Pro
Posts: 4417
Joined: Wed Dec 26, 2007 7:45 pm
Zip Code: 32536
Circle of Safety: Y
Location: FL, Crestview

Re: Set bolt broken on steering knuckle

Postby RaymondDurban » Thu Jun 20, 2013 12:08 am

Glad it worked out for you Ray!

  • Similar Topics
    Last post

Return to “Farmall Cub”

Who is online

Users browsing this forum: Arthur Luke, Phil S. and 2 guests