dead ignition modual

Batteries, magnetos, distributors, wiring harnesses and more.

Moderator: Team Cub

Roninpa
5+ Years
5+ Years
Posts: 113
Joined: Mon Feb 15, 2010 10:11 pm
Zip Code: 15330

dead ignition modual

Postby Roninpa » Fri Mar 27, 2015 8:42 pm

I had a concrete quickie saw that didn't have any spark, I disconnected the grounding shut wire from coil and still no spark. i put a new module on and still no spark. At that point i was really lost, so i went on a small engine forum [ i don't recall which one] and typed in a description of my problem and found this solution. Put a socket on the fly wheel nut and spin it in the direction of rotation with a drill motor and the coil will resume sparking. I did this and it worked and the saw started on the first pull after this. I don't no why this works but it does. You can try this on any small engine and if you still don't have spark the module is dead. Ron

User avatar
John *.?-!.* cub owner
Team Cub Guide
Team Cub Guide
Posts: 22920
Joined: Sun Feb 02, 2003 2:09 pm
Zip Code: 63664
Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
Location: Mo, Potosi

Re: dead ignition modual

Postby John *.?-!.* cub owner » Fri Mar 27, 2015 9:51 pm

Be sure to use a drill, not an impact for that. An impact will strip the threads in the nut. One guess how I know.
If you are not part of the solution,
you are part of the problem!!!


  • Similar Topics
    Replies
    Views
    Last post

Return to “Ignition/Electrical”

Who is online

Users browsing this forum: No registered users and 1 guest