Wheel weight question

All other non-specific model Farmall / IH / CASE tractors. (Catch-All)

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
User avatar
WJ
10+ Years
10+ Years
Cub Star!!
Cub Star!!
Posts: 382
Joined: Sun Jun 13, 2004 10:18 am
Location: Weatherford, Ok

Wheel weight question

Postby WJ » Sun Jul 31, 2005 4:14 pm

Are the front weights the same on the A B C H and M. I have been told that but it doesn't seem right.
Last edited by WJ on Sun Jul 31, 2005 11:31 pm, edited 1 time in total.
If it doesn't move and it should, use WD-40. If it moves and shouldn't, use duct tape.

Dave1
10+ Years
10+ Years
Posts: 22
Joined: Thu Jun 24, 2004 12:40 am
Location: TN., Rogersville

Postby Dave1 » Sun Jul 31, 2005 11:30 pm

They are the same, WJ.

User avatar
WJ
10+ Years
10+ Years
Cub Star!!
Cub Star!!
Posts: 382
Joined: Sun Jun 13, 2004 10:18 am
Location: Weatherford, Ok

Postby WJ » Sun Jul 31, 2005 11:32 pm

Thanks.
If it doesn't move and it should, use WD-40. If it moves and shouldn't, use duct tape.

User avatar
beaconlight
Cub Pro
Cub Pro
501 Club
501 Club
Posts: 7703
Joined: Thu Aug 19, 2004 2:31 pm
Zip Code: 10314
Location: NY Staten Island & Franklin

Postby beaconlight » Mon Aug 01, 2005 5:47 am

Same weights on the rear of a cub cadet too.

Bill
Bill

"Life's tough.It's even tougher if you're stupid."
- John Wayne

" We hang petty thieves and appoint the great ones to public office."
- Aesop

User avatar
WJ
10+ Years
10+ Years
Cub Star!!
Cub Star!!
Posts: 382
Joined: Sun Jun 13, 2004 10:18 am
Location: Weatherford, Ok

Postby WJ » Mon Aug 01, 2005 7:18 am

beaconlight wrote:Same weights on the rear of a cub cadet too.

Bill
I think that the cub and the cub cadet are the only ones that are the same.
If it doesn't move and it should, use WD-40. If it moves and shouldn't, use duct tape.

User avatar
Cub-Bud
Cub Pro
Cub Pro
501 Club
501 Club
Posts: 3268
Joined: Sun Feb 02, 2003 6:30 pm
Zip Code: 38658
eBay ID: Cub-Bud
Circle of Safety: Y
Location: MS, Pope

Postby Cub-Bud » Mon Aug 01, 2005 9:18 am

Yep, that is correct. The front wheel weights on the cubs are the same ones used on the rear of the cadets. 8)
"Never forget where it is you come from, or you may find yourself someplace you don't want to be"

Greg Norman

WKPoor
5+ Years
5+ Years

Postby WKPoor » Mon Aug 01, 2005 4:48 pm

If they are the same that something I didn't know. H's and M's are the same as they both have 16 wheel and rim. A,B,C's have 15" rims so I'm not sure how the same weight would work for both.

Little Indy
10+ Years
10+ Years
Cub Star!!
Cub Star!!
Posts: 286
Joined: Thu Nov 04, 2004 11:50 pm
eBay ID: falco-de-fiume
Location: NE, Cheney

Postby Little Indy » Mon Aug 01, 2005 6:25 pm

How about IH 140? Does the wheel weights for A fit a 140?
Little Red would like to know.
Thanks
Si hoc legere scis,nimium eruditionis habes.

Jim Becker
Team Cub
Team Cub
501 Club
501 Club
Posts: 12164
Joined: Sun Feb 02, 2003 2:59 pm
Zip Code: 55319
Circle of Safety: Y
Location: MN

Postby Jim Becker » Wed Aug 10, 2005 6:13 pm

The front Cub and rear Cadet weights are the same, but different from the other tractors. The weight on the front of the A B C H and M is the same but different from the Cub weight (heavier and 3 bolts). This weight fits through the 130 but I don't think it fits the 140. The 140 has a disk wheel and probably needs a 4 bolt weight.


Return to “Farmall / IH / CASE”

Who is online

Users browsing this forum: No registered users and 0 guests