What happened at work today.

[Slim140]

Got this coulter back together for the 194 plow. Forgot to take before pictures, oops. Got to get new grease fittings.

[Slim140]

Welded two 6” barb fittings on 2 flanges for a customers oil cooler where the pipe didn’t hold.

[mozer71]

Very Cool stuff on serious biz.

[Slim140]

Picked this up from powdercoat.

[Slim140]

Got the new serial plate riveted on and the stainless lift pins in.

[AL Farmall Boy]

[mozer71]

I know it is pretty but I don't know what it is. Lift pins ..something else going on here. Maybe some new members are looking at the same time.

[Slim140]

It’s a Lely from page 12.

[Slim140]

A friend of mine ask me about doing a welding job for him so I went by his house a couple weeks ago and looked at what he needs done and long story short wound up trading the welding for these. He said the pump runs good it's just been sitting.

[Slim140]

The disk appears to be a Blanton, I got one for the Cub a few weeks ago and it still has the tag, they both have the same frame/weight boxes. Looks like someone has modified this one and added the 3 point. It's larger and heavier than the one for the Cub so I'm assuming it's for a 140? I don't really know.

[Slim140]

The cultivator may be getting a FH spike and used with the 140, maybe for higher garden items, it has really good points/shovels on it.

[AL Farmall Boy]

That is some nice equipment. Those single bog disks are really nice to have. I would put new blades on that disk and a fast hitch point and use with the 140. Cultivator is real nice too!

[Slim140]

Washed the big pump, picked up the suction hose and got another pump from the same man.

Edit:forgot hose photo.

[Slim140]

Brought some more "stuff" to work on at work. I caught some groundhogs for a friend last year and she called me last week and said she had another. Her husband passed away several years ago and my brother and I used to help him in tobacco, my dad and brother mow hay off her place now. He had a couple 140's and when he passed she sold them. I noticed last year when I was there that there was an old barrel sprayer sitting in the woods and from a distance it looked like it had a fast hitch prong on it. Yesterday I went by and set the trap and I ask about the sprayer and ask if she wanted to get rid of it. She said you can have it, I said I'm gonna go look at it if you don't mind she said help yourself. I walked up and looked at it only wanting the FH prong and walked around the building and there were 2 more sprayers with FH prongs on them, noticed in the shed there was a Sitrex spreader needing some attention so I walked back to her house and knocked on the door and told her there were actually 3 sprayers and also the red spreader in the shed and ask her if she would sell them. She said I don't need any of it, if there's anything at all up there you can use you can have it because I'm tired of seeing it sit. I walked back up there and loaded the spreader and 2 of the sprayer frames and found a stabilizer bar for one of the 140's whoever bought them missed, a PTO shield for a 140 and a fertilizer hopper lid laying on the ground. There are a couple other things that I am going to ask about today when I go back for the other sprayer just to make sure she doesn't want.

[Slim140]

Going back for this sprayer today. I remember using this when I was a kid. We used to help him drag irrigation pipe (it's all there with the sprinkler heads and the pump/power unit). I don't know if I need any of the irrigation stuff but hate to see it sit and waste away so I may ask her what she wants to do with it.