Question- Cub tool bar?

The Cub Club -- Questions and answers to all of your Cub related issues.

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
User avatar
Moondoggie
10+ Years
10+ Years
Posts: 37
Joined: Sun May 24, 2009 7:29 pm
Zip Code: 77429
Tractors Owned: 1952 Farmall Cub #157195 w/belly mower, side sickle mower, blade, cultivators, tool bar w/middle buster, turning plow, row disks; 1952 Farmall Cub #151228 w/belly mower and 12V conversion; 1965 International Cub # 226021 w/42" Woods mower; 1958 Farmall Cub for parts # 204437
Location: Cypress, TX

Question- Cub tool bar?

Postby Moondoggie » Fri Jul 19, 2019 5:27 pm

Maybe I'm referring to it wrong, but what do you call the early Cub tool bar (rear)? I don't see it listed in the items in the Cub Registry and I have one with multiple items that attach to it. Middle buster, turning plow, row disks? Tried searching "Cub tool bar but no hits???

User avatar
Moondoggie
10+ Years
10+ Years
Posts: 37
Joined: Sun May 24, 2009 7:29 pm
Zip Code: 77429
Tractors Owned: 1952 Farmall Cub #157195 w/belly mower, side sickle mower, blade, cultivators, tool bar w/middle buster, turning plow, row disks; 1952 Farmall Cub #151228 w/belly mower and 12V conversion; 1965 International Cub # 226021 w/42" Woods mower; 1958 Farmall Cub for parts # 204437
Location: Cypress, TX

Re: Question- Cub tool bar?

Postby Moondoggie » Fri Jul 19, 2019 5:41 pm

OK, probably answered part of my own question. Looked at the manual and it's called Cub-6 Tool Bar (Rear). I have the Disk Cultivating attachment (Plain disk), Extra Beam Attachment with Middle Buster Bottom, but can't find a manual for the Tool Bar mounted turning plow. Anyway, how do you search for info on the site for these attachments? Thanks.

User avatar
Moondoggie
10+ Years
10+ Years
Posts: 37
Joined: Sun May 24, 2009 7:29 pm
Zip Code: 77429
Tractors Owned: 1952 Farmall Cub #157195 w/belly mower, side sickle mower, blade, cultivators, tool bar w/middle buster, turning plow, row disks; 1952 Farmall Cub #151228 w/belly mower and 12V conversion; 1965 International Cub # 226021 w/42" Woods mower; 1958 Farmall Cub for parts # 204437
Location: Cypress, TX

Re: Question- Cub tool bar?

Postby Moondoggie » Fri Jul 19, 2019 5:54 pm

I finally searched on"Cub-6 Tool Bar (Rear)" and found a little info but not much.

User avatar
tmays
10+ Years
10+ Years
Posts: 3041
Joined: Wed May 11, 2011 8:59 pm
Zip Code: 39154
Tractors Owned: 1948 Allis Chalmers G
1947 Cub
1952 Cub
1940 Farmall H
154 Cub LoBoy
Location: Vicksburg, MS

Re: Question- Cub tool bar?

Postby tmays » Fri Jul 19, 2019 6:45 pm

Check out the pdf manual section for the cub. I believe the cub 6 toolbar would be under the cultivators section. To the best of my knowledge, a turning plow was not offered but a middlebuster was
Thomas

tst
10+ Years
10+ Years
Posts: 4275
Joined: Tue Jan 12, 2010 2:08 pm
Zip Code: 12514
Circle of Safety: Y

Re: Question- Cub tool bar?

Postby tst » Fri Jul 19, 2019 7:31 pm

and a Cub 7 is a fast hitch version

Waif
501 Club
501 Club
Posts: 981
Joined: Thu Aug 25, 2016 1:29 pm
Zip Code: 49343
Tractors Owned: 48 Farmall Cub "Seen Yore Dobbin"
53 F-Cub W/Loader.
Circle of Safety: Y
Location: Michigan

Re: Question- Cub tool bar?

Postby Waif » Fri Jul 19, 2019 8:08 pm

Moondoggie wrote:Maybe I'm referring to it wrong, but what do you call the early Cub tool bar (rear)? I don't see it listed in the items in the Cub Registry and I have one with multiple items that attach to it. Middle buster, turning plow, row disks? Tried searching "Cub tool bar but no hits???


I have cultivator set up on rear bars. Not sure how your plow and discs fit.

You don't mean draw bar do you?

If not , here's some rear bars.
https://www.ebay.com/i/323846122482?chn ... gLEOvD_BwE

User avatar
Moondoggie
10+ Years
10+ Years
Posts: 37
Joined: Sun May 24, 2009 7:29 pm
Zip Code: 77429
Tractors Owned: 1952 Farmall Cub #157195 w/belly mower, side sickle mower, blade, cultivators, tool bar w/middle buster, turning plow, row disks; 1952 Farmall Cub #151228 w/belly mower and 12V conversion; 1965 International Cub # 226021 w/42" Woods mower; 1958 Farmall Cub for parts # 204437
Location: Cypress, TX

Re: Question- Cub tool bar?

Postby Moondoggie » Sat Jul 20, 2019 10:00 am

No, I don't mean draw bar, different. Search on "Cub-6 Tool Bar (Rear)" and you'll see what I mean. Next time I'm at the farm I'll try some pictures of the parts uninstalled. Got the belly mower on for the summer mowing (3 ac).

Waif
501 Club
501 Club
Posts: 981
Joined: Thu Aug 25, 2016 1:29 pm
Zip Code: 49343
Tractors Owned: 48 Farmall Cub "Seen Yore Dobbin"
53 F-Cub W/Loader.
Circle of Safety: Y
Location: Michigan

Re: Question- Cub tool bar?

Postby Waif » Sat Jul 20, 2019 1:07 pm

Page 13.jpg


  • Similar Topics
    Replies
    Views
    Last post

Return to “Farmall Cub”

Who is online

Users browsing this forum: Alex M and 3 guests