RIngs, gaskets

[Command52]

Hi I bought most my tractor parts from our sponsor below T , I need rings, bearings and gasket set for rebuild but don't see them on his sight .

[Don McCombs]

Try our other sponsor, Hamilton Bob’s.

[DRaymond]

If these goof folks do not have what you need try Steiner Tractor Parts

[John *.?-!.* cub owner]

Most any real auto parts place (not Autozone types) can get them. You will need to know what sized pistons you have, Std., .020, .030, or .040 over you have.

[Jackman]

NAPA

[BigBill]

Mic the crank too? Check the valve guide clearance.

Hone the cylinders to break the glaze. And to put a cross hatch that holds oil to lube the rings and pistons.

http://www.enginehones.com

Ball hone

[Command52]

Thank you for your advice , I will give them a try ,

[Command52]

Would Napa RINGS AND BEARINGS be of the same quality or better than parts from a place like steiners .

[tst]

I rebuild a lot of engines, gaskets try and stick to fel pro or victor/mahle, they are much better quality made in the usa, many are imports and they are junk, try and use clevite brand bearings or other usa made as they still lead mixed in them, nos are the good ones, new bearings from many are just a aluminum and they score easily, rings I like chrome 3 piece oil rings with cast iron compression type

[ntrenn]

Last rings I did had option for chrome or std. price difference was over double more for the chrome. It’s been almost 5 years and the cheap ones are doing fine. They did come from Napa.