Looking for the size of the clevis pin that acts as the pivot on the swinging drawbar. Parts manual just says that it is a pivot pin with a part number, no size.
Matt
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Swinging drawbar pivot pin size
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
MrBee
- 5+ Years
- Posts: 27
- Joined: Sat Jun 30, 2018 11:01 pm
- Zip Code: 08221
- Tractors Owned: 1955 Cub Hi-crop
1948 Cub
1952 Cub
1959 International LoBoy
1954 Cub
1974 Cub
1962 International LoBoy
-
Ole90633
- 10+ Years
- Posts: 93
- Joined: Tue Aug 07, 2012 6:49 am
- Zip Code: 17701
- Tractors Owned: 1949 Farmall Cub Standard
- Location: Williamsport, PA
Re: Swinging drawbar pivot pin size
Hello there, MrBee !
I saw that you haven't gotten a reply to your question and was under my '49, checking final drive oils.
The steel Clevis Pin on my CUB is 5/8" D. X 2 1/16" L. shank, under the head to bottom.
Went to fastenal.com and looked up a comparable pin...
There you go !
Don
I saw that you haven't gotten a reply to your question and was under my '49, checking final drive oils.
The steel Clevis Pin on my CUB is 5/8" D. X 2 1/16" L. shank, under the head to bottom.
Went to fastenal.com and looked up a comparable pin...
There you go !
Don
-
MrBee
- 5+ Years
- Posts: 27
- Joined: Sat Jun 30, 2018 11:01 pm
- Zip Code: 08221
- Tractors Owned: 1955 Cub Hi-crop
1948 Cub
1952 Cub
1959 International LoBoy
1954 Cub
1974 Cub
1962 International LoBoy
Re: Swinging drawbar pivot pin size
Don,
Thank you for that information.
Matt
Thank you for that information.
Matt
Who is online
Users browsing this forum: No registered users and 47 guests
