Mott flail mower

[Rusty red]

Does anyone know the part number for the bearings on a mott flail mower depth roller?

[Barnyard]

[Eugene]

For Mott flail mower models D9 and D95, the Mott part number for the roller bearing is 102002.

There are two bearings used in the roller.

I have never looked up a cross reference for the bearing number.

[Rusty red]

Thank you Barnyard. I did a search with that number and couldn't come up with anything.

[Eugene]

Remove one of the bearings from your roller. Check to see if there is a manufacturers number on the bearing.

There was more than likely several changes in Motts roller bearings.

[John *.?-!.* cub owner]

They are closed at present, but Flailmaster has them in their catalog at bottom of page 16.

[Dale Finch]

These are the bearings I bought for my Mott Flail mower a couple years ago. They had the same number, and as you can see they looked slightly different, but were the same number and dimensions, and the mower works great! Hope this helps.

[Fordman]

There is a company call "cleancutter.com" that I just ordered some blades and other parts from. Might want to check with them as well.

[kully560]

I am now in need of those bearings also can you tell me where you purchased them from and the part # thanks

[Don McCombs]

Have you tried calling Flailmaster? The bearing number is in the photo above.

[SamsFarm]

If you have a local company, like Bearings inc, or Bearing Service Company (bsc), they can use the numbers on the bearings in the pics