This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Woods 59c-3 mule pulley
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 406
- Joined: Thu Jan 02, 2014 4:23 pm
- Zip Code: 49316
- Tractors Owned: 1954 farmall fcub, 1954 farmall super m
- Location: Caledonia, MI
Woods 59c-3 mule pulley
Over the last year I have been fighting one of the mule pulleys that are on the back of the mower. The bearing went bad and I replaced it but it never has worked well since. Last mowing the new bearings fell apart. I had another new one on hand a swapped it out. Well the side of the pulley has apparently been rubbing somewhere and the metal is worn quite bad and this mowing the pulley was wobbling and I checked it out and the bearing can go all the way through the pulley. So I am looking for a place to buy a new high quality pulley or two for this set up but am unable to find anything online that looks like it will work out. Anyone have a supplier?
- Don McCombs
- Team Cub Mentor
- Posts: 17488
- Joined: Mon Feb 03, 2003 6:45 am
- Zip Code: 21550
- Tractors Owned: "1950 Something" Farmall Cub
1957 Farmall Cub w/FH
1977 International Cub w/FH
1978 International Cub
1948 Farmall Super A - Circle of Safety: Y
- Location: MD, Deep Creek Lake
Re: Woods 59c-3 mule pulley
Have you checked with a Woods dealer?
-
- 10+ Years
- Posts: 406
- Joined: Thu Jan 02, 2014 4:23 pm
- Zip Code: 49316
- Tractors Owned: 1954 farmall fcub, 1954 farmall super m
- Location: Caledonia, MI
Re: Woods 59c-3 mule pulley
The woods dealer isn’t open currently and on their website they don’t show anything to do with woods equipment because they are also the IH dealer. I’ll check on them tomorrow if I don’t get any more bites.
-
- 10+ Years
- Posts: 1431
- Joined: Fri Jan 25, 2008 9:02 am
- Zip Code: 00000
- Circle of Safety: Y
Re: Woods 59c-3 mule pulley
Hamilton Bobs has them but don't know about quality.
https://www.ebay.com/itm/WOODS-MOWER-RE ... 3275508224
https://www.ebay.com/itm/WOODS-MOWER-RE ... 3275508224
-
- 5+ Years
- Posts: 2822
- Joined: Wed Jul 08, 2015 10:24 am
- Zip Code: 19342
- Tractors Owned: 1948 6v - Dozer
1949 with kub klipper belly mower. mag 6v - Mom
1950 with plow, 54 blade, mott mag 6v - Roxanne
1953 54 blade, c22, wood 42 6v
1957 6v - barn Queen
1965 lo-boy with c-3 mower 12 v - Loboy
1974 Horse II 12 v c-2
1975 with woods 42-6 12 v - Horse
1979 long strip 12 v stuck engine
130 with international 1000 loader 6 v
1969 140 with bush hog tow behind mower 12 v
Terramite T-6 4WD Backhoe Perkins diesel
Memberships: Rough and Tumble Engineers Historical Association;Chapter 8 IH Collectors; IH Collectors Worldwide - Circle of Safety: Y
- Location: Glen Mills PA
Re: Woods 59c-3 mule pulley
Messicks has a good online catalog for finding woods and IH mower parts numbers. They also have a good stock. Something I find better prices and availably at Hoobers https://www.hoober.com/PartsDiagram These are PA stores but I assume they will ship anywhere
ih
https://www.messicks.com/cas/60690
woods
https://www.messicks.com/wo/95201
ih
https://www.messicks.com/cas/60690
woods
https://www.messicks.com/wo/95201
When you only have 9 horsepower you need to know the names of all of the ponies!
Who is online
Users browsing this forum: No registered users and 61 guests