I have a Cub that has been restored and runs great. It's a 1949 with hydraulics. It came with a pile of implement parts. I have the 40 page manual that list some of the optional parts with pictures but it has no detail which pieces are required for a setup or which attachment location should be used. It came with a disc plow, bush hog, scrape blade and disc harrow that I can probably figure out with some trial and error.
what I am having trouble with are the cultivators. I want to use it to work a small garden, about 50 X 100. Does anyone know of videos, detailed manuals for installation or parts identification?
I can. attach pictures but there are going to be a lot of them.
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Implement installation
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- Posts: 14
- Joined: Fri May 29, 2020 12:03 pm
- Zip Code: 28012
- Tractors Owned: 49 Cub
-
- 10+ Years
- Posts: 6684
- Joined: Tue Apr 27, 2010 11:34 am
- Zip Code: 27517
- Tractors Owned: '51 Cub #140966 "Bruno" with Woods 59 mower
'55 Cub #187541 "Betty" with Fast Hitch
'55 Cub #190482 "Ben" with Woods 42 mower
'55 Cub #191739 "Bertha" with Woods 42 mower
'56 Cub #194370 "Boris" with Mott Flail mower - Circle of Safety: Y
- Location: NC, Chapel Hill
-
- Team Cub
- Posts: 11862
- Joined: Tue May 25, 2004 8:02 pm
- Zip Code: 80501
- Tractors Owned: Cubs, MH Pony, Shaw, Allis G, 1934 Silver King, JD LA and LI, Gibson D, David Bradley Tri-Trac
- Circle of Safety: Y
- Location: CO, Longmont
Re: Implement installation
If you click on "quick links" (upper left of the page), then on "PDF manuals", then on "Farmall Cub", then on "attachments", you'll find manuals for a majority of the implements. Parts manuals are also there for both the Cub and implements.
"We don't need to think more,
we need to think differently."
-Albert Einstein
we need to think differently."
-Albert Einstein
-
- 10+ Years
- Posts: 6152
- Joined: Mon Mar 19, 2012 7:33 pm
- Zip Code: 00000
- Tractors Owned: 1956 Farmall Cub with Fast Hitch, F-11 plow, Disc, Cultivator, Cub-22 mower
- Circle of Safety: Y
- Location: Wa.
Re: Implement installation
Hi,
There are owner's or operators manuals for many implements on this website. They have lots of info.
Below is the Cub 144 Cultivator owner's manual, it has lots of info and shows how to put the cultivator on the Cub.
I don't know if you have that Cultivator, but there were many of them.
You don't use the manual lift lever shown in the manual, if the Cub has Touch Control.
You have to have the rear rockshaft, and rod, shown in the lower pic on page 9, to raise the rear cultivators.
You have to have the Universal Mounting Frame, shown on page 10, to mount the cultivator to.
The Universal Mounting Frame is used to attach other equipment to the Cub also.
http://farmallcub.com/rudi_cub/www.clea ... index.html
Below are the implement manuals from Rudi's Manuals.
Rudi's Manuals are at the top of the page, go to Cub Info first.
http://farmallcub.com/rudi_cub/www.clea ... index.html
There are owner's or operators manuals for many implements on this website. They have lots of info.
Below is the Cub 144 Cultivator owner's manual, it has lots of info and shows how to put the cultivator on the Cub.
I don't know if you have that Cultivator, but there were many of them.
You don't use the manual lift lever shown in the manual, if the Cub has Touch Control.
You have to have the rear rockshaft, and rod, shown in the lower pic on page 9, to raise the rear cultivators.
You have to have the Universal Mounting Frame, shown on page 10, to mount the cultivator to.
The Universal Mounting Frame is used to attach other equipment to the Cub also.
http://farmallcub.com/rudi_cub/www.clea ... index.html
Below are the implement manuals from Rudi's Manuals.
Rudi's Manuals are at the top of the page, go to Cub Info first.
http://farmallcub.com/rudi_cub/www.clea ... index.html
-
- Posts: 14
- Joined: Fri May 29, 2020 12:03 pm
- Zip Code: 28012
- Tractors Owned: 49 Cub
Re: Implement installation
I have tried to upload the photos but I get a message that the file is too large.
-
- Team Cub Mentor
- Posts: 17489
- Joined: Mon Feb 03, 2003 6:45 am
- Zip Code: 21550
- Tractors Owned: "1950 Something" Farmall Cub
1957 Farmall Cub w/FH
1977 International Cub w/FH
1978 International Cub
1948 Farmall Super A - Circle of Safety: Y
- Location: MD, Deep Creek Lake
Re: Implement installation
Reduce their file size using an app like Irfanview or similar. If you’re using Windows, you can also email them to yourself. It will ask if you want to resize. Reduce to 480 X 640.
-
- Posts: 14
- Joined: Fri May 29, 2020 12:03 pm
- Zip Code: 28012
- Tractors Owned: 49 Cub
Re: Implement installation
Thanks for the help. I downloaded some manuals and. they are helping. I am now trying to identify the connector parts that I have and match them to the parts that I need.
I just started using a Mac after 30 years of Windows and am having lots of trouble. I thought that having an iphone and
Mac would make things easier but I must be too old to start over. I will keep trying to load the pictures but it is not going well.
Smitty
I just started using a Mac after 30 years of Windows and am having lots of trouble. I thought that having an iphone and
Mac would make things easier but I must be too old to start over. I will keep trying to load the pictures but it is not going well.
Smitty
-
- Similar Topics
- Replies
- Views
- Last post
-
- 0
- 131
-
by smallfarm
Sat Jun 26, 2021 8:18 am
-
-
1-point Fast Hitch for Cub - Installation Attachment(s)
by lakesurfer » Sun Mar 03, 2024 1:56 pm » in Farmall Cub - 19
- 601
-
by staninlowerAL
Tue Apr 02, 2024 4:44 am
-
-
- 11
- 278
-
by Bob McCarty
Mon Apr 10, 2023 4:38 pm
-
- 10
- 520
-
by Greenthumbfarms
Sun Jan 23, 2022 3:24 pm
-
- 17
- 463
-
by Eugene
Sat Feb 04, 2023 11:37 pm
Who is online
Users browsing this forum: No registered users and 1 guest