Putting together my Low-Boy basket. Just went to mount the headlights and the brackets that screw into the hood are too large diameter.The
brackets are 5/8 11 and standard on all my other Cubs but the hood nuts are 9/16 12 on this hood. I can't find a listing anywhere for 9/16 brackets. The hood holes and nuts look to be original. I guess I am going to drill and tap the hood to 5/8 11. I am just wondering when or if IH used the 9/16 12 brackets or if this is a Mutt.
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
headlight mount
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 5+ Years
- Posts: 129
- Joined: Mon Sep 04, 2017 11:12 am
- Zip Code: 01007
- Tractors Owned: 49 Cub,57Cub, 57 Low Boy, 48 BN, 48 Ford8N, 49Ford 8N, 56 Massey Harris 50, 58 MF 65, 77 MF 265
- Circle of Safety: Y
- Location: Belchertown, MA
-
- 10+ Years
- Posts: 5345
- Joined: Tue Jan 12, 2010 2:08 pm
- Zip Code: 12514
- Circle of Safety: Y
Re: headlight mount
somebody changed it, they are always 5/8 11 on all cubs
-
- 10+ Years
- Posts: 805
- Joined: Tue Apr 17, 2012 7:55 pm
- Zip Code: 47119
- Skype Name: ntrenn
- Tractors Owned: 63 Cub 221833 in family since '69
65 Lo-boy 19648 with an un-stuck #4 - it lives!!!
144 Cultivators with disc hillers
193 Plow
42C mower
59L mower mounted on the Fcub
23A Disc - lost possession - Circle of Safety: Y
- Location: Indiana
Re: headlight mount
The headlight brackets are standard parts from McMaster. They probably have a size that will fit the nuts you have in your hood.
-
- 5+ Years
- Posts: 129
- Joined: Mon Sep 04, 2017 11:12 am
- Zip Code: 01007
- Tractors Owned: 49 Cub,57Cub, 57 Low Boy, 48 BN, 48 Ford8N, 49Ford 8N, 56 Massey Harris 50, 58 MF 65, 77 MF 265
- Circle of Safety: Y
- Location: Belchertown, MA
Re: headlight mount
The hole in the sheet metal is smaller than the other hoods that I have and the fixed nuts inside look original. The 5 mounting holes on the sides of the hood
that mount the rectangular emblems are 5/16 dia. These holes seem too big, but I don't have the emblems to mount yet so i don't
know if this is right. This is a late round nose Cub with a 4 bar grill.
that mount the rectangular emblems are 5/16 dia. These holes seem too big, but I don't have the emblems to mount yet so i don't
know if this is right. This is a late round nose Cub with a 4 bar grill.
-
- 10+ Years
- Posts: 5345
- Joined: Tue Jan 12, 2010 2:08 pm
- Zip Code: 12514
- Circle of Safety: Y
Re: headlight mount
those holes hold moulding clips for the oval emblems that just push in to them
-
- 10+ Years
- Posts: 1207
- Joined: Sat Jan 28, 2012 3:13 pm
- Zip Code: 68803
- Tractors Owned: 1948 Cub, Kittie; 1948 Cub, Harold; 1949 Cub, 49er; 1951 Cub, Tucker; 1951 Cub, Homely; 1956 Cub High Crop; 1957 Cub Loboy; 57 Cub Loboy w/fasthitch + 194 plow; 1958 Cub LoBoy w/FH, Popeye; 1961 Cub, Beater; #1-1962 Cub Loboy Dually (Originally Orange) w/Foot Throttle; #2-1962 Cub Loboy Dually (Originally Orange) w/Foot throttle; Yellow 1963 Cub Loboy and blade; 1970 Cub, Cubbie; and 5 other Cubs in various stages of disaasembly and disrepair; 1962 Cub Cadet Original; 2 other Cub Cadet Originals; Cub Cadet 100; Cub Cadet 124 w/Creeper; Cub Cadet 147; 2 Cub Cadet 129's; Cub Cadet 149; 1948 Allis Chalmers C w/single frontwheel; 1944 Farmall H w/Tokhiem Cab; 2 One Point Fasthitch Carriers; 2-#100 Fasthitch Rear Blade; 2 Sets Cub 144 Cultivators; 2 Sets Cub #252 Cultivators; 3 Cub #193 Mouldboard Plows; 1 Cub #193 Slatted Plow; 1 1948 Cub-54 Snow Plow; 3 Cub-54 49-5 Snow Plows; Cub #6 Tool Bar w/Disc Blades & Middlebuster. 2-#105 sickle mowers, #152 disc plow
- Circle of Safety: Y
- Location: Grand Island, Nebraska
Re: headlight mount
The holes use a barrel clip to hold the emblems on. The clips go in the holes and the emblems push into the clips.
Frank
-
- 5+ Years
- Posts: 129
- Joined: Mon Sep 04, 2017 11:12 am
- Zip Code: 01007
- Tractors Owned: 49 Cub,57Cub, 57 Low Boy, 48 BN, 48 Ford8N, 49Ford 8N, 56 Massey Harris 50, 58 MF 65, 77 MF 265
- Circle of Safety: Y
- Location: Belchertown, MA
Re: headlight mount
The holes for the barrel clips are much smaller on my 57 with the older mounting emblems.
-
- 10+ Years
- Posts: 1207
- Joined: Sat Jan 28, 2012 3:13 pm
- Zip Code: 68803
- Tractors Owned: 1948 Cub, Kittie; 1948 Cub, Harold; 1949 Cub, 49er; 1951 Cub, Tucker; 1951 Cub, Homely; 1956 Cub High Crop; 1957 Cub Loboy; 57 Cub Loboy w/fasthitch + 194 plow; 1958 Cub LoBoy w/FH, Popeye; 1961 Cub, Beater; #1-1962 Cub Loboy Dually (Originally Orange) w/Foot Throttle; #2-1962 Cub Loboy Dually (Originally Orange) w/Foot throttle; Yellow 1963 Cub Loboy and blade; 1970 Cub, Cubbie; and 5 other Cubs in various stages of disaasembly and disrepair; 1962 Cub Cadet Original; 2 other Cub Cadet Originals; Cub Cadet 100; Cub Cadet 124 w/Creeper; Cub Cadet 147; 2 Cub Cadet 129's; Cub Cadet 149; 1948 Allis Chalmers C w/single frontwheel; 1944 Farmall H w/Tokhiem Cab; 2 One Point Fasthitch Carriers; 2-#100 Fasthitch Rear Blade; 2 Sets Cub 144 Cultivators; 2 Sets Cub #252 Cultivators; 3 Cub #193 Mouldboard Plows; 1 Cub #193 Slatted Plow; 1 1948 Cub-54 Snow Plow; 3 Cub-54 49-5 Snow Plows; Cub #6 Tool Bar w/Disc Blades & Middlebuster. 2-#105 sickle mowers, #152 disc plow
- Circle of Safety: Y
- Location: Grand Island, Nebraska
Re: headlight mount
Yes, The stainless emblems had smaller pins on the back. (Late 54 to early 58)
Frank
-
- Similar Topics
- Replies
- Views
- Last post
-
- 4
- 367
-
by jobbyjim
Sun Mar 03, 2024 12:51 pm
-
- 8
- 158
-
by Fireman9731
Fri Jul 26, 2024 11:35 am
-
- 4
- 261
-
by dtu2179
Sun Nov 07, 2021 12:35 pm
-
-
A question about disassembling a cub headlight Attachment(s)
by Scott from Marshfield » Sat Oct 21, 2023 7:58 pm » in Farmall Cub - 10
- 377
-
by tst
Mon Oct 23, 2023 5:15 pm
-
-
- 1
- 160
-
by Barnyard
Wed Aug 11, 2021 3:47 pm
Who is online
Users browsing this forum: No registered users and 11 guests