just wondering if I can get a list of parts I'll need if I replace the bolster on my cub....
Paul
Replace Bolster (maybe)
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 310
- Joined: Sun Feb 26, 2012 8:08 pm
- Zip Code: 2756
- eBay ID: dog525
- Tractors Owned: 1957 CUB
- Circle of Safety: Y
- Location: Wilberforce NSW Australia
Replace Bolster (maybe)
Cripes - I thought I'd never get one.
-
- 10+ Years
- Posts: 5907
- Joined: Tue Apr 27, 2010 11:34 am
- Zip Code: 27517
- Tractors Owned: '51 Cub "Bernie" with Fast Hitch
'55 Cub "Bruno" with Woods 59 mower
'55 Cub "Bertha" with Woods 42 mower
'55 Cub "Ben" with Woods 42 mower
'56 Cub "Boris" with Mott Flail mower - Circle of Safety: Y
- Location: NC, Chapel Hill
Re: Replace Bolster (maybe)
Seems like you have the awesome luck of needing big/heavy parts for that cub!!! You couldn't just need a set of points, or a gasket???!! 

-
- 10+ Years
- Posts: 310
- Joined: Sun Feb 26, 2012 8:08 pm
- Zip Code: 2756
- eBay ID: dog525
- Tractors Owned: 1957 CUB
- Circle of Safety: Y
- Location: Wilberforce NSW Australia
Re: Replace Bolster (maybe)
LOL , I think I'm going to call it the red devil
Cripes - I thought I'd never get one.
-
- 5+ Years
- Posts: 2251
- Joined: Wed Jul 08, 2015 10:24 am
- Zip Code: 19342
- Tractors Owned: 1948 6v - Dozer
1949 with kub klipper belly mower. mag 6v - Mom
1950 with plow, 54 blade, mott mag 6v - Roxanne
1953 54 blade, c22, wood 42 6v
1957 6v - barn Queen
1965 lo-boy with c-3 mower 12 v - Loboy
1974 Horse II 12 v c-2
1975 with woods 42-6 12 v - Horse
1979 long strip 12 v stuck engine
130 with international 1000 loader 6 v
1969 140 with bush hog tow behind mower 12 v
Terramite T-6 4WD Backhoe Perkins diesel
Memberships: Rough and Tumble Engineers Historical Association;Chapter 8 IH Collectors; IH Collectors Worldwide - Circle of Safety: Y
- Location: Glen Mills PA
Re: Replace Bolster (maybe)
The steering gaskets and bushing seals, and the radiator gaskets pulse and " while the hood is off" parts you need. Rivets to change the sn plate.
I would get the bolster from JP tractor ( bee below) They sandblast and inspect them. I bought a used one and the first thing I had to do is get it blasted. You also should use Glyptal on the "wet" surfaces inside.
I would get the bolster from JP tractor ( bee below) They sandblast and inspect them. I bought a used one and the first thing I had to do is get it blasted. You also should use Glyptal on the "wet" surfaces inside.
When you only have 9 horsepower you need to know the names of all of the ponies!
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Welch plug...to replace or not replace...? Attachment(s)
by Dale Finch » Sun Sep 19, 2021 9:47 pm » in Farmall Cub - 7
- 424
-
by Dale Finch
Thu Sep 23, 2021 11:30 pm
-
-
- 7
- 235
-
by inairam
Mon Feb 28, 2022 12:23 pm
-
- 1
- 264
-
by tst
Sat Aug 03, 2019 10:23 am
-
-
Bolster repair and refresh. Attachment(s)
by Pickerincal » Sun Jul 19, 2020 3:35 pm » in Farmall Cub - 3
- 374
-
by Glen
Sun Jul 19, 2020 7:30 pm
-
-
- 1
- 333
-
by Glen
Wed Nov 27, 2019 2:50 am
Who is online
Users browsing this forum: (CUB HUT) and 3 guests