Rescue Cub in Brazil

Kilgore1948 · Postby **Kilgore1948** » Tue Jan 04, 2022 1:49 pm

I have seen several cubs in my life but never one with no grill. I’m wondering why that one had a solid nose?

Postby **Don McCombs** » Tue Jan 04, 2022 4:06 pm

I don't think that Stephane's Cub had a solid grille. I think it just appears that way in the video. Perhaps he will clear it up for us.

stephanev8brazil · Postby **stephanev8brazil** » Wed Jan 05, 2022 10:25 am

Kilgore1948 wrote:I have seen several cubs in my life but never one with no grill. I’m wondering why that one had a solid nose?

Hello Kilgore. How Are you?

My cub has a grill. What video or pic do you talk?

stephanev8brazil · Postby **stephanev8brazil** » Wed Jan 05, 2022 10:29 am

Hello Friends.

Today I am Happy. My Cub parts and tools arrive from USA. I will post pics as soon !

stephanev8brazil · Postby **stephanev8brazil** » Wed Jan 05, 2022 3:23 pm

Hello.

stephanev8brazil · Postby **stephanev8brazil** » Wed Jan 05, 2022 3:24 pm

$:{_}:$ $:{_}:$ $:{_}:$ $:{_}:$

stephanev8brazil · Postby **stephanev8brazil** » Wed Jan 05, 2022 3:41 pm

stephanev8brazil · Postby **stephanev8brazil** » Wed Jan 05, 2022 3:41 pm

stephanev8brazil · Postby **stephanev8brazil** » Wed Jan 05, 2022 3:49 pm

Igntion Wires made in USA, best quality.

Postby **Bob McCarty** » Wed Jan 05, 2022 3:56 pm

Stephane, In case you don't know, check the throw out bearing to make sure it is full of cheap (low temperature) grease. It is also best to soak it in oil for a few days before installation. A lot of the aftermarket carburetors don't have the float set correctly, so you may also want to check that. May sure you pull the two halves straight apart or you risk breaking the thin idle tube that threads into the carburetor top.

Postby **Don McCombs** » Wed Jan 05, 2022 4:21 pm

Also with respect to the repro carb, read page 4 of the following thread…

viewtopic.php?t=108040&start=45

indy61 · Postby **indy61** » Wed Jan 05, 2022 4:37 pm

Kilgore1948 wrote:I have seen several cubs in my life but never one with no grill. I’m wondering why that one had a solid nose?

I'm not sure I've seen one in that bad of state. I wonder how to repair something like that or do you buy a replacement?

stephanev8brazil · Postby **stephanev8brazil** » Wed Jan 05, 2022 4:46 pm

Don McCombs wrote:Also with respect to the repro carb, read page 4 of the following thread…

http://www.farmallcub.com/phpBB2/viewto ... 0&start=45

Thank You. I will read the page 4.

stephanev8brazil · Postby **stephanev8brazil** » Wed Jan 05, 2022 4:50 pm

indy61 wrote:
Kilgore1948 wrote:I have seen several cubs in my life but never one with no grill. I’m wondering why that one had a solid nose?

I'm not sure I've seen one in that bad of state. I wonder how to repair something like that or do you buy a replacement?
Untitled.jpg

Hello. I will restore it.

stephanev8brazil · Postby **stephanev8brazil** » Wed Jan 05, 2022 4:53 pm

Bob McCarty wrote:Stephane, In case you don't know, check the throw out bearing to make sure it is full of cheap (low temperature) grease. It is also best to soak it in oil for a few days before installation. A lot of the aftermarket carburetors don't have the float set correctly, so you may also want to check that. May sure you pull the two halves straight apart or you risk breaking the thin idle tube that threads into the carburetor top.

Thank you very much per information. Very important in my project. I will obeserve all the details informed by you.

Farmall Cub

Rescue Cub in Brazil

Re: Rescue Cub in Brazil

Re: Rescue Cub in Brazil

Re: Rescue Cub in Brazil

Re: Rescue Cub in Brazil

Re: Rescue Cub in Brazil

Re: Rescue Cub in Brazil

Re: Rescue Cub in Brazil

Re: Rescue Cub in Brazil

Re: Rescue Cub in Brazil

Re: Rescue Cub in Brazil

Re: Rescue Cub in Brazil

Re: Rescue Cub in Brazil

Re: Rescue Cub in Brazil

Re: Rescue Cub in Brazil

Re: Rescue Cub in Brazil

Who is online