Rescue Cub in Brazil

stephanev8brazil · Postby **stephanev8brazil** » Wed Oct 27, 2021 8:53 am

Good afternoon to all

i'm ready to send some parts of the cub to sandblast. soon i will post the pics and videos.

Pap · Postby **Pap** » Wed Oct 27, 2021 3:24 pm

We are looking forward to seeing them.

Postby **Don McCombs** » Wed Oct 27, 2021 4:14 pm

stephanev8brazil wrote:Good afternoon to all

i'm ready to send some parts of the cub to sandblast. soon i will post the pics and videos.

Be careful with any sheet metal parts. They can be warped by over-blasting.

stephanev8brazil · Postby **stephanev8brazil** » Wed Oct 27, 2021 4:20 pm

Don McCombs wrote:
stephanev8brazil wrote:Good afternoon to all

i'm ready to send some parts of the cub to sandblast. soon i will post the pics and videos.

Be careful with any sheet metal parts. They can be warped by over-blasting.

Yes. The process are make with glass dust, know? . This material is less abrasive.

Postby **Don McCombs** » Wed Oct 27, 2021 4:46 pm

Good choice. I am familiar with glass beads.

stephanev8brazil · Postby **stephanev8brazil** » Fri Oct 29, 2021 11:26 am

Hey guys.

Today, I solved the seal pulley problem. Now, I can use Brazilian Milimeters seal, very easy to find here.

Pap · Postby **Pap** » Fri Oct 29, 2021 2:00 pm

Hey we are proud of you. Work with what you have.
Keep up the great job.

stephanev8brazil · Postby **stephanev8brazil** » Fri Oct 29, 2021 2:13 pm

Pap wrote:Hey we are proud of you. Work with what you have.
Keep up the great job.

Thank You Pap,

Friends of the Farmallcub.com had helping-me a lot with good information.

stephanev8brazil · Postby **stephanev8brazil** » Sat Oct 30, 2021 8:16 am

Good Morning everyone
Today I am Working with transmission parts. I will disassemble everthing parts for inspection and cleaning.
While I wait to arrive the new engine gaskets from usa.

stephanev8brazil · Postby **stephanev8brazil** » Sat Oct 30, 2021 8:24 am

I will have a hard work to remove the seat post. The bolts are very rusty and head damage.

I try with heat, it didn´t work. Now i try weld a nut in the bolt head.

Does anyone have any suggestion ?

Dale Finch · Postby **Dale Finch** » Sat Oct 30, 2021 9:17 am

Many folks have had success with welding the nut on, and they will probably chime in.

Just a note, in case you didn't already know, the axle extension that the seat, battery box & platform are attached to is hollow, with only the differential shaft going through it.

stephanev8brazil · Postby **stephanev8brazil** » Sat Oct 30, 2021 9:58 am

Dale Finch wrote:Many folks have had success with welding the nut on, and they will probably chime in.

Just a note, in case you didn't already know, the axle extension that the seat, battery box & platform are attached to is hollow, with only the differential shaft going through it.

Thank you, I have sucess with welding.