what are these parts ?

[Bigwally30]

Hi,
I bought a lot at a local auction, got a loop drawbar with brackets. Plus lots of other parts, would like some help identify what I got.
The drawbar brackets are not cub (sadness), 5 inches between mounting holes, the other parts are a big question mark.
Thanks for the help.

[v w]

Picture three would appear to me to be old plow joiners (sp?). These ran against the coulter to bury the top of the soil being turned. Vern

[Don McCombs]

Picture 1 is drawbar brackets for a Super A. No clue on the rest.

[Bigwally30]

Thanks vw, after looking and found some pictures, sure helps to have the right terminology when cruising the internet.
Don, that was what I thought but was not sure. Did they make a dual purpose bracket that would fit cub and A.
I have one on my cub that has extra holes, but moves the spacing up. With the belly blade I have no room to swing the blade
to an angle. I can take a picture if anyone is interested.

[tnestell]

Look at this.

http://www.tmtractor.com/tm-tractor/gim/blade54_002.htm

[Don McCombs]

The answer to your question about the drawbar bracket is No.

[Eugene]

Picture #4. Tines/teeth from spring toothed harrow? Probably from a horse drawn harrow.