Helicoil Question

[hpierce]

I have a set of Cub rear axle extensions that the threads, where the rear wheel disc attaches, are stripped on the outside threads. I have a helicoil kit and was wondering, since the threads go all the way through the flange, do I need to use red loctite or JB Weld to hold it in place. I don't want the
helicoil to work all the way through the flange. Any suggestions are welcome.

[Rodney51Cub]

I would use red loctite.

[ricky racer]

I would use red loctite.

[hpierce]

Thanks for the help. Will start working on my project this week.