New 1948 cub
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
1948cubnovice
- Posts: 42
- Joined: Sat Oct 02, 2021 10:10 pm
- Zip Code: 38469
- Tractors Owned: 1948 farmall cub
1948 farmall cub
Allis Chalmers c
New 1948 cub
I found this little cub when i went to pick up a flat bottom plow today and it is complete so i picked it up two
- Attachments
-
-
-
-
-
-
69ranger
- 10+ Years
- Posts: 226
- Joined: Sun Jan 20, 2013 10:36 pm
- Zip Code: 67357
- Tractors Owned: 1948 Cub, 1952 Cub, 1953 Cub, 1946 Farmall A, 1949 Farmall M, 1956 IH 130, 1979 IH 140, 1959 Farmall 240.
Several Brand X Green tractors that sound strange when they run.
1969 F-100 fully restored, 1969 F 100 original paint, 1973 F 100, 50 K original miles all original, 1978 F250 repainted, 1978 Bronco, 1967 Mustang, 1973 Mach ! Mustang.
Several single cylinder Honda motorcycles from the early 70's. Adding more junk all the time. - Location: Parsons, Kansas
Re: New 1948 cub
Great Job!
I have a weak spot for not saying no to a new toy.
Can hardly wait to hear a condition report, and if its a fixer or parts tractor.
I have a weak spot for not saying no to a new toy.
Can hardly wait to hear a condition report, and if its a fixer or parts tractor.
-
1948cubnovice
- Posts: 42
- Joined: Sat Oct 02, 2021 10:10 pm
- Zip Code: 38469
- Tractors Owned: 1948 farmall cub
1948 farmall cub
Allis Chalmers c
Re: New 1948 cub
69ranger wrote:Great Job!
I have a weak spot for not saying no to a new toy.
Can hardly wait to hear a condition report, and if its a fixer or parts tractor.
I hope it will be a fixer but i will find out about noon toady when it gets to my shop I will put up some better pics tonight when i get it home and give a report on if the engine is stuck or not
-
1948cubnovice
- Posts: 42
- Joined: Sat Oct 02, 2021 10:10 pm
- Zip Code: 38469
- Tractors Owned: 1948 farmall cub
1948 farmall cub
Allis Chalmers c
Re: New 1948 cub
69ranger wrote:Great Job!
I have a weak spot for not saying no to a new toy.
Can hardly wait to hear a condition report, and if its a fixer or parts tractor.
Looks like it will be a fixer engine is free it looks like someone has been into the engine has the wrong head bolt in it going to
lap the vales and replace the head gasket and head bolts then i will try to start it
Here are some better pics
- Attachments
-
-
-
-
-
69ranger
- 10+ Years
- Posts: 226
- Joined: Sun Jan 20, 2013 10:36 pm
- Zip Code: 67357
- Tractors Owned: 1948 Cub, 1952 Cub, 1953 Cub, 1946 Farmall A, 1949 Farmall M, 1956 IH 130, 1979 IH 140, 1959 Farmall 240.
Several Brand X Green tractors that sound strange when they run.
1969 F-100 fully restored, 1969 F 100 original paint, 1973 F 100, 50 K original miles all original, 1978 F250 repainted, 1978 Bronco, 1967 Mustang, 1973 Mach ! Mustang.
Several single cylinder Honda motorcycles from the early 70's. Adding more junk all the time. - Location: Parsons, Kansas
Re: New 1948 cub
GOOD LUCK! 
-
Stanton
- Cub Pro
- Posts: 7760
- Joined: Mon Jun 22, 2009 6:56 am
- Zip Code: 64070
- Tractors Owned: 1942 Farmall AV, serial #87025
1947 Farmall Circle Cub, serial #2116
1948 Farmall Cub, serial #46066 - Circle of Safety: Y
- Location: Lone Jack, MO
-
SamsFarm
- 501 Club
- Posts: 1853
- Joined: Wed Jan 20, 2021 8:21 pm
- Zip Code: 44410
- Tractors Owned: 1968 Cub Fast Hitch
LF-1 Platform Carrier
144 Cultivators
L-F194 Plow(s)
F38 Disk
L-F3 Spring Tooth Harrow
CS Bell No. 60 Grain Mill on a unmodified Fast Hitch Disk hitch prong
Home Made Fast Hitch Potato Plow
54A Blade
Couple 1948 Cubs
172 Runner Planter
53 Fertilizer
Cub-3 Field Cultivator
Cub-189 Two Way Plow
Cub-22 Sickle Bar Mower
Mechanical Transplanter with side mount barrel (needs a fast hitch adapter) :)
Misc Belly Mowers
Wish List
International 100 Fast Hitch Blade
Mott Fast Hitch Flail Mower
Wish Wish Wish List
Fast Hitch Rotary Hoe
4E hammer mill - Location: Ne Ohio
Re: New 1948 cub
Those are spiffy looking socket head cap screws!
They just dont look right in that application!
They just dont look right in that application!
1968 Cub Fast-Hitch
-
1948cubnovice
- Posts: 42
- Joined: Sat Oct 02, 2021 10:10 pm
- Zip Code: 38469
- Tractors Owned: 1948 farmall cub
1948 farmall cub
Allis Chalmers c
Re: New 1948 cub
Stanton wrote:Good to hear. Let us know your progress…
Nice to save another Cub!
i will try to keep everyone informed of the progress . I will post pics. as i move along on this project . Besides i will probably have to ask some advice while working on it .
-
1948cubnovice
- Posts: 42
- Joined: Sat Oct 02, 2021 10:10 pm
- Zip Code: 38469
- Tractors Owned: 1948 farmall cub
1948 farmall cub
Allis Chalmers c
Re: New 1948 cub
SamsFarm wrote:Those are spiffy looking socket head cap screws!
They just dont look right in that application!
Sr you are right they don't look right i have already ordered new head bolts and gasket kit that was the first thing i done
-
- Similar Topics
- Replies
- Views
- Last post
-
- 2
- 178
-
by Glen
Sun Dec 11, 2022 7:50 pm
-
- 8
- 707
-
by Don McCombs
Tue May 30, 2023 4:18 pm
-
- 4
- 223
-
by 1948cubnovice
Sat Oct 09, 2021 1:40 pm
-
- 30
- 1252
-
by Glen
Wed Apr 06, 2022 6:55 pm
-
- 5
- 317
-
by Gary Dotson
Tue Apr 27, 2021 7:51 am
Who is online
Users browsing this forum: No registered users and 0 guests
