Cub-152 replacement disk options?

[mcooper]

I have a source for a cub-152 locally. But I want to put a new disk on to have it back at the original 26”. What is the concavity of the 152 disk originally?


I found this over at agrisupply but not knowing the dimensions, I don’t want to jump yet. https://www.agrisupply.com/mm-sch-conca ... e/p/32719/

[Bob McCarty]

I have one with no wear that is 26". The concavity measure 4 1/4". I doubt the extra 3/4" would cause problems. You may need to alter the center hole.
Welcome to the forum.

[tst]

If I remember correctly it is the same disc on a IH Harrow, maybe for a big harrow, not a cub one ?

[Jim Becker]

A plain center might be a better fit.
https://www.agrisupply.com/disc-blade/p/80314/

[mcooper]

https://photos.app.goo.gl/9zhaLVYCJfp6kBaX9
It measured 25” so no need for replacing this one yet. The scraper needs adjusting and the rest of it needs paint. It spins great.