Source for 8 ga. female spade terminal (3/8" or 10 mm)

[tst]

just did one recently on a 1910 ford tractor, it was used to connect the harness to the ignition switch, got the terminal from napa

[Bob McCarty]

Tim, Can you give me a part #? When I asked there, they just sent me over to the "rack" with bubble packs on it.

[Gary Dotson]

Bob, I’ll look through my terminal cabinet. I have a couple drawers of misc. and I kinda think I’ve seen some of those.

[tst]

Bob when I was at Napa they just handed it to me, was not in a package, will see if I can find more info

[tmays]

https://www.minimania.com/part/47H5419/ ... ide-35-Amp

Bob, this looks like it fits the bill. But I’ve never ordered from here, so I can’t recommend. Not a fan of the website and they admit that order may be returned due to shipping difficulties. But that’s pretty normal nowadays with usps. I have two current orders made from different companies that have been lost apparently. So order at your own risk

[CharlieK]

it's in the USA

[Peter Person]

https://windandsolar.com/3-8-inch-spade-terminals/

[birddog]

How about an 8 gauge butt connector split and flattened, then ground down to 3/8 ths.

Edit: Sorry, I forgot you were looking for female terminals.

[kully560]

sorry my bad I read to quick

[phill_mi]

If I understand the issue I think you are looking for a F2 to F1 adapter sold at most Battery outlets
https://www.amazon.com/Terminal-Adapters-Lead-Acid-Battery/dp/B076BX37VK/ref=asc_df_B076BX37VK?tag=bingshoppinga-20&linkCode=df0&hvadid=80195721138761&hvnetw=o&hvqmt=e&hvbmt=be&hvdev=c&hvlocint=&hvlocphy=&hvtargid=pla-4583795267645234&psc=1

[Gary Dotson]

Bob, I thought I might have some of those but I couldn’t locate them.

[69ranger]

Hey Bob,

We used to get a lot of things from Digi-Key when I worked in the electronics field.
They have a lot of parts, and might have what you need.

Good luck, and I am interested in the out come of your electric steering project. This sounds like a great way to improve and old hard to steer tractor. My M could sure use some help..

[Bob McCarty]

Thanks for all the leads. I found some 3/8" for 10-12 ga. wire, but will stop by Batteries Plus and a trailer store to see if I can find 8 ga. local. I'd rather not pay the shipping for two terminals if I can find them here.