What would be best way to straighten this radiator? I got this in trade some time ago, condition unknown. Is there a DIY way to test it?
Thanks,
Gary
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Bent radiator
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 5+ Years
- Posts: 179
- Joined: Wed Nov 04, 2015 5:43 pm
- Zip Code: 27041
- Tractors Owned: ---------
1948 Farmall Cub #56596
1950 Farmall Cub #101608
1950 Farmall Cub #106823
1955 Farmall Cub #188789 - Location: NC, Pilot Mountain
-
- 5+ Years
- Posts: 408
- Joined: Sun Jul 08, 2018 9:02 pm
- Zip Code: 27606
- Tractors Owned: 1949 farmall cub(building from parts) 1950 farmall cub
1971 David Brown 880 selectamatic - Circle of Safety: Y
Re: Bent radiator
I’d use an adjustable wrench and just bend it back as best as I could. I took a 2x6 and a router and made a “test board”. I routed a an area big enough for the tubes to sit in and allow the flange to sit flat on the board. I then put a gasket between the board and radiator and screwed the radiator down to the board. It worked fine for leak testing with no pressure. I don’t know how well it would have worked if I tried to put any pressure on it.
-
- 10+ Years
- Posts: 5214
- Joined: Tue Jan 12, 2010 2:08 pm
- Zip Code: 12514
- Circle of Safety: Y
Re: Bent radiator
that will bend with your fingers
-
- Team Cub
- Posts: 24272
- Joined: Tue Aug 07, 2007 3:39 pm
- Zip Code: 45030
- Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100 - Circle of Safety: Y
- Location: OH, New Haven (Hamilton County)
Re: Bent radiator
Check out this how too for testing. viewtopic.php?f=138&t=12532
There are two ways to get enough Cubs. One is to continue to accumulate more and more. The other is to desire less.
-
- 5+ Years
- Posts: 179
- Joined: Wed Nov 04, 2015 5:43 pm
- Zip Code: 27041
- Tractors Owned: ---------
1948 Farmall Cub #56596
1950 Farmall Cub #101608
1950 Farmall Cub #106823
1955 Farmall Cub #188789 - Location: NC, Pilot Mountain
Re: Bent radiator
Thanks guys, I think you have me covered on my questions.
-
- Similar Topics
- Replies
- Views
- Last post
-
- 6
- 332
-
by Lt.Mike
Wed Jul 21, 2021 10:43 am
-
-
Is this bent or welded wrong? Attachment(s)
by smallfarm » Sat Jan 14, 2023 8:18 pm » in Farmall Cub - 2
- 276
-
by smallfarm
Sat Jan 14, 2023 9:26 pm
-
-
- 10
- 345
-
by wrz
Sun May 09, 2021 8:59 am
-
- 4
- 365
-
by johnnygo
Fri Jun 18, 2021 4:42 pm
-
- 43
- 1181
-
by goxu1
Fri Jul 30, 2021 5:24 pm
Who is online
Users browsing this forum: wrz and 5 guests