Generator
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- Cub Star!
- Posts: 249
- Joined: Mon Nov 02, 2020 11:18 pm
- Zip Code: Nope
- Circle of Safety: Y
Re: Generator
I think slim to none , and I think slim just left town , just my opinion though .
-
- 5+ Years
- Posts: 2748
- Joined: Wed Jul 08, 2015 10:24 am
- Zip Code: 19342
- Tractors Owned: 1948 6v - Dozer
1949 with kub klipper belly mower. mag 6v - Mom
1950 with plow, 54 blade, mott mag 6v - Roxanne
1953 54 blade, c22, wood 42 6v
1957 6v - barn Queen
1965 lo-boy with c-3 mower 12 v - Loboy
1974 Horse II 12 v c-2
1975 with woods 42-6 12 v - Horse
1979 long strip 12 v stuck engine
130 with international 1000 loader 6 v
1969 140 with bush hog tow behind mower 12 v
Terramite T-6 4WD Backhoe Perkins diesel
Memberships: Rough and Tumble Engineers Historical Association;Chapter 8 IH Collectors; IH Collectors Worldwide - Circle of Safety: Y
- Location: Glen Mills PA
Re: Generator
I have tried many jobs early on by not taking the hood off.
It is far less frustrating to do most jobs by taking the hood off. It is not that hard and it will be a faster total job time in most cases.
You do have to watch for project creep: "Well while the hood is off I should...."
It is far less frustrating to do most jobs by taking the hood off. It is not that hard and it will be a faster total job time in most cases.
You do have to watch for project creep: "Well while the hood is off I should...."
When you only have 9 horsepower you need to know the names of all of the ponies!
-
- 10+ Years
- Posts: 335
- Joined: Fri Feb 04, 2005 7:20 pm
- Zip Code: 08876
- Tractors Owned: 1953 F-Cub
1957 F-Cub
1956 Lo-Boy
1971 Cub Cadet 149
1976 Cub Cadet 1200 - Circle of Safety: Y
Re: Generator
Way simpler to remove the hood….the hardest part is draining the fuel. Use a pump or disconnect fuel line and have a LARGE container with a funnel if your tank full!! Sure would be nice if it was mounted outside the hood….
NJ Farmer
NJ Farmer
-
- 5+ Years
- Posts: 201
- Joined: Mon Feb 09, 2015 2:57 pm
- Zip Code: 56377
Re: Generator
You shouldn't have to drain the tank ,just shut the valve off and disconnect the supply line. And if you have someone to help lift it off and on , that's the way to go. Much easier to work on with the tank off.
-
- Team Cub
- Posts: 17106
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Re: Generator
JimCub48 wrote:You shouldn't have to drain the tank. . . . And if you have someone to help lift it off and on, . . .
That is the catch. The hood/tank is fairly manageable for one person if the tank is nearly empty. An extra 30 or 40 pounds of gas makes it a bit much. My gas tanks are close to empty most of the time, totally empty usually happens at the far end of the property.
-
- 10+ Years
- Posts: 335
- Joined: Fri Feb 04, 2005 7:20 pm
- Zip Code: 08876
- Tractors Owned: 1953 F-Cub
1957 F-Cub
1956 Lo-Boy
1971 Cub Cadet 149
1976 Cub Cadet 1200 - Circle of Safety: Y
Re: Generator
Bingo that why I said drain the gas because at 6 lbs per gallon and sloshing around it make life more challenging.
NJ Farmer
NJ Farmer
-
- 5+ Years
- Posts: 157
- Joined: Sun Sep 30, 2018 3:09 pm
- Zip Code: 06482
- Circle of Safety: Y
Re: Generator
yeah while the hood is off... that's how my "frame off" restoration started. 18 months later a pretty tractor came out, and a wife patient enough for pretty red parts to occupy the basement while the work was progressing....
c
c
-
- Similar Topics
- Replies
- Views
- Last post
-
- 40
- 2127
-
by Cubfriend
Thu Mar 11, 2021 12:17 pm
-
- 11
- 498
-
by Gary Dotson
Thu Sep 29, 2022 7:34 am
-
- 3
- 160
-
by Chooch
Fri Jun 30, 2023 7:22 am
-
- 4
- 155
-
by Gary Dotson
Tue Aug 08, 2023 7:44 am
-
- 7
- 214
-
by Dale Finch
Fri Sep 22, 2023 1:17 pm
Who is online
Users browsing this forum: No registered users and 1 guest