Tractors needed for Cubfest NE

[Cecil]

Tractors needed for CUbfest NE. We need something to work on. Pris would also like the ladies to bring a plain t shirt or sweatshirt for her mystery project.

[Peter Person]

...never thought I would see the day when there wasn't anything to work on at CubFest NE.

Maybe we have to chip in and buy a fixer-upper to work on!

[jasondepinto]

I have a new to me 1956 Loboy I just started messing with. I could bring it up for some projects if need be.

[Peter Person]

Jason,
Bring it!

[Grant]

Hello. I can bring my 1949 Cub. It needs a new clutch, pp and throw out brng. Might as well do rear main while at it. Would drive out from Michigan for the weekend and bring all new parts. Is this what you’re looking for? Thanks

[Cecil]

New clutch job is our specialty. Come and have a good time.

[Barnyard]

Vzfnjm, those guys will have you fixed up in no time. Two weeks after you go to Cecil's you might want to take a ride to Cincinnati for another CubFest.

[Dale Finch]

Hello. I can bring my 1949 Cub. It needs a new clutch, pp and throw out brng. Might as well do rear main while at it. Would drive out from Michigan for the weekend and bring all new parts. Is this what you’re looking for? Thanks

Start presoaking your Throwout bearing in oil now, and order one of Tim Talleur's rear seal/retainers. (I believe you would have to pay a deposit until you sent in your old seal/retainer as a core).
https://farmallcub.com/phpBB2/viewtopic.php?f=223&t=115506

[Grant]

I will order all the parts by Friday night. Recommendations are welcome. I am also open to lodging recommendations for the wifey and I.

[Cecil]

They just redid the Red Roof Inn in the middle of Norwich. They spent about 8 million dollars on it. What days do you think you will be here ? Have your wife bring a plain t shirt or sweat shirt if she would like to join Pris in her mystery craft.

[Don McCombs]

I will order all the parts by Friday night. Recommendations are welcome. I am also open to lodging recommendations for the wifey and I.

Tim will likely be at the Cubfest, so he may be able to just bring your retainer and seal with him.

[Grant]

I will drive to Oxford Thursday October 5. I will try to get reservations at the Red Roof. We will attend the show Fri, Sat, Sun. We will drive back Sunday.
I will bring new clutch, pplate, t/o brng, rear main seal and retainer, oil pan gskt, 6 qts motor oil and an oil filter. I also have a kit of the screws/nuts for the hood/sheet metal. Anything else I may be overlooking? Let me know. I will be buying the parts from one of the venders on this site.

Thanks! Grant Powers, gepowers58@yahoo.com

[Grant]

Added clutch pilot bushing, gskt for crank seal retainer, new fuel bowl and fuel line.

[tst]

oil pan gasket, lock tite, try and look in the inspection hole to see if the bearing holder is chewed up or bent, if so replace that also

[dgrapes59]

If you have a touch control, you will need a gasket for the hydro line (or the O rings, depending on what you disconnect to split it) since it will need to be disconnected.