This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Horse Power Question
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 100
- Joined: Sun Jan 19, 2014 5:20 pm
- Zip Code: 64011
- Tractors Owned: 1973 International Cub S# 241812
Horse Power Question
Ok this might seem a little stupid or funny to some but I am trying to figure this out.
I have a cub cadet lt1050 mower with a 25 horse power kohler engine
The cub has a 9-10 horse power engine
I know that my cub cadet can't pull a plow like the cub can or do other things like the cub can
So why is it rated higher in horse power?
Is it because it spins the blades faster?
Can the cub do the work the cadet can't because of the weight?
I have asked this before on another website and got great answers but sometimes all of the jargon confuses me.
I have a cub cadet lt1050 mower with a 25 horse power kohler engine
The cub has a 9-10 horse power engine
I know that my cub cadet can't pull a plow like the cub can or do other things like the cub can
So why is it rated higher in horse power?
Is it because it spins the blades faster?
Can the cub do the work the cadet can't because of the weight?
I have asked this before on another website and got great answers but sometimes all of the jargon confuses me.
-
- Team Cub
- Posts: 24289
- Joined: Tue Aug 07, 2007 3:39 pm
- Zip Code: 45030
- Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100 - Circle of Safety: Y
- Location: OH, New Haven (Hamilton County)
Re: Horse Power Question
It is the gearing and the torque.
There are two ways to get enough Cubs. One is to continue to accumulate more and more. The other is to desire less.
-
- Team Cub Mentor
- Posts: 20418
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
Re: Horse Power Question
Depending on the year, the Cub's engine puts out 13 to 16 horse power.
Tractors are rated at horse power on the draw bar or belt pulley and normally not engine horse power. So, the 9 - 10 horsepower is draw bar rated.
Engine horse power is the result of a mathematical formula. Torque x rpms divided by 5252 equals horse power. An engine developing high to very high rpms and with low torque will have more horse power than an engine developing very low rpms and high torque.
Torque is grunt on the ground. Engine horse power is an indication of how fast the task can be accomplished.
Keeping things simple, one is rated at lawn mower horse power and the other is tractor horse power. If you want a lawn mower, go for engine horse power. If you want to accomplish some sort of farm related task, go for torque.
Tractors are rated at horse power on the draw bar or belt pulley and normally not engine horse power. So, the 9 - 10 horsepower is draw bar rated.
Engine horse power is the result of a mathematical formula. Torque x rpms divided by 5252 equals horse power. An engine developing high to very high rpms and with low torque will have more horse power than an engine developing very low rpms and high torque.
Torque is grunt on the ground. Engine horse power is an indication of how fast the task can be accomplished.
Keeping things simple, one is rated at lawn mower horse power and the other is tractor horse power. If you want a lawn mower, go for engine horse power. If you want to accomplish some sort of farm related task, go for torque.
I have an excuse. CRS.
-
- 10+ Years
- Posts: 4143
- Joined: Thu Nov 09, 2006 11:26 pm
- Zip Code: 61722
Re: Horse Power Question
Don't know bout CC and plow, BUT my Allis 917-H will out plow my cub pulling Brinley 10" plows ---Did try that last fall here in gardens!---917 has 18 horse engine instead of 17, also has BIG rear wheel weights and big ole fat BAR tread tires on it! the reason for the pullin power is the fact that it takes HYDRO to maximize the speed/traction/rpm/and hp!---THAT is why I am converting one of my 48 cubs to HYDRO drive! thanks; sonny
-
- 10+ Years
- Posts: 2680
- Joined: Mon Oct 24, 2005 11:35 am
- Zip Code: 14072
- eBay ID: toysforjake
- Tractors Owned: Lots of Cub Cadets!
1951 Farmall Cub
1977 IH Cub
1966 IH Cub
1965 IH Lo Boy
1964 IH Lo Boy
1949 Farmall Cub
Several IH 154 Lo Boys
1979 IH 184 Lo Boy
Simplicity 4416 Sovereign
Simplicity Conquest
Simplicity Legacy 4x4 Diesel
Mitsubishi MT180D 4x4 Diesel - Circle of Safety: Y
- Location: Grand Island, NY
Re: Horse Power Question
One of the biggest differences however, is how they NOW rate small engine horsepower. Small engines are bench tested with no intake filter, no exhaust, no PTO clutch, and nothing attached to the drive shaft. So, a bare engine is bolted to a test stand, and run unhindered, to determine the "horsepower".
As mentioned earlier, a cub (and all farm tractors of the time) is rated at 9 horsepower at the drawbar. So, tractor built, assembled, complete with exhaust system, air intake filter, transmission, etc., then loaded down to determine how much it can pull.
These are COMPLETELY different methods to determine horsepower.
That 25-hp engine in your new Cub Cadet is likely more equivilant to a 7 or 8 hp farm tractor, a walk behind farm tractor. Probably less since the frame, wheels, transmission, etc., could not handle the load that an 8-hp farm tractor could.
Also, given the opposite, if you ran a cub C-60 engine on a bench with nothing attached to it, it would likely rate in at around 25 to 30 hp.
So, you really have to look apples to apples when comparing these things.
As mentioned earlier, a cub (and all farm tractors of the time) is rated at 9 horsepower at the drawbar. So, tractor built, assembled, complete with exhaust system, air intake filter, transmission, etc., then loaded down to determine how much it can pull.
These are COMPLETELY different methods to determine horsepower.
That 25-hp engine in your new Cub Cadet is likely more equivilant to a 7 or 8 hp farm tractor, a walk behind farm tractor. Probably less since the frame, wheels, transmission, etc., could not handle the load that an 8-hp farm tractor could.
Also, given the opposite, if you ran a cub C-60 engine on a bench with nothing attached to it, it would likely rate in at around 25 to 30 hp.
So, you really have to look apples to apples when comparing these things.
Cub Cadets 682, 1811, 1864, Simplicity Legacy XL 4x4 Diesel with FEL, 60" mower, 50" Tiller
-
- 10+ Years
- Posts: 100
- Joined: Sun Jan 19, 2014 5:20 pm
- Zip Code: 64011
- Tractors Owned: 1973 International Cub S# 241812
Re: Horse Power Question
Thanks for the replies.
I think these have helped me understand more than any other answers I have ever gotten!
Thanks a million!!
I think these have helped me understand more than any other answers I have ever gotten!
Thanks a million!!
-
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Re: Horse Power Question
Also, don't forget the fact that the garden tractor engine is usually turning at 3600 rpm to get the rated horsepower, while the cub engine is turning at 1800. I wonder which will last longer?
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
-
- 10+ Years
- Posts: 2680
- Joined: Mon Oct 24, 2005 11:35 am
- Zip Code: 14072
- eBay ID: toysforjake
- Tractors Owned: Lots of Cub Cadets!
1951 Farmall Cub
1977 IH Cub
1966 IH Cub
1965 IH Lo Boy
1964 IH Lo Boy
1949 Farmall Cub
Several IH 154 Lo Boys
1979 IH 184 Lo Boy
Simplicity 4416 Sovereign
Simplicity Conquest
Simplicity Legacy 4x4 Diesel
Mitsubishi MT180D 4x4 Diesel - Circle of Safety: Y
- Location: Grand Island, NY
Re: Horse Power Question
John,
That gets into a whole other set of variables. High RPM vs low RPM, air cooled vs water cooled, aluminum vs cast iron block, twin cylinder vs 4 cylinder, V block vs inline block, etc. LOTS of variables there!!! I can tell you however, an inline, water cooled 4-cylinder, cast iron block engine running at 1800 rpm will aparently last...... well..... it's looking like it will last forever.
However, an aluminum, air cooled v-twin running at 3600 rpm will typically last about 10 years or about 1000 hours, or until the first time you let her run a little low on oil!
Oh yea, that's another thing, a small engine holding about a quart of oil, vs a 4-cylinder with 3 or 4 quarts of oil in it. Again, wonder which will be more forgiving if you forget to check it????
That gets into a whole other set of variables. High RPM vs low RPM, air cooled vs water cooled, aluminum vs cast iron block, twin cylinder vs 4 cylinder, V block vs inline block, etc. LOTS of variables there!!! I can tell you however, an inline, water cooled 4-cylinder, cast iron block engine running at 1800 rpm will aparently last...... well..... it's looking like it will last forever.
However, an aluminum, air cooled v-twin running at 3600 rpm will typically last about 10 years or about 1000 hours, or until the first time you let her run a little low on oil!
Oh yea, that's another thing, a small engine holding about a quart of oil, vs a 4-cylinder with 3 or 4 quarts of oil in it. Again, wonder which will be more forgiving if you forget to check it????
Cub Cadets 682, 1811, 1864, Simplicity Legacy XL 4x4 Diesel with FEL, 60" mower, 50" Tiller
-
- 10+ Years
- Posts: 2917
- Joined: Sat Feb 11, 2006 5:26 pm
- Location: NC
Re: Horse Power Question
One critical factor is the weight of the tractor. Of all the Nebraska Tractor Tests I have reviewed, the maximum horizontal pull measured in pounds is always less than the weight of the tractor (including any added ballast). And this is the case for both dirt and paved surfaces. Thus a heavier tractor with less horsepower can pull more, depending on the gearing of the drivetrain, than can a lighter tractor of greater horsepower. A Rumely OilPull 30/60 (30 horsepower drawbar. 60 horsepower belt) probably can pull more than a new 150 horsepower tractor. But the Rumely cannot pull it very fast. Much too slow to be practical for today's applications
I have a larger tractor which travels 1 5/8 MPH full throttle in first gear. With heavy ballast, it is amazing how much it will pull. But the ballast hinders it at higher speeds.
I have a larger tractor which travels 1 5/8 MPH full throttle in first gear. With heavy ballast, it is amazing how much it will pull. But the ballast hinders it at higher speeds.
Luck favors those who are prepared
-
- 10+ Years
- Posts: 2929
- Joined: Sun Apr 19, 2009 9:51 pm
- Zip Code: 63664
- Location: MO, Potosi
Re: Horse Power Question
Another way I have heard this explained is;Eugene wrote:........Torque is grunt on the ground. Engine horse power is an indication of how fast the task can be accomplished........
Torque gets you moving, Horsepower keeps you moving
-
- 10+ Years
- Posts: 100
- Joined: Sun Jan 19, 2014 5:20 pm
- Zip Code: 64011
- Tractors Owned: 1973 International Cub S# 241812
Re: Horse Power Question
Did horse power ever go up in the cub series?
Did it ever go up from the first year til 1964?
What about the International Cub until 1975?
Or
The New International Cub until 1979?
Did it ever go up from the first year til 1964?
What about the International Cub until 1975?
Or
The New International Cub until 1979?
-
- 10+ Years
- Posts: 100
- Joined: Sun Jan 19, 2014 5:20 pm
- Zip Code: 64011
- Tractors Owned: 1973 International Cub S# 241812
Re: Horse Power Question
The Drawbars are the same according to tractor data at 10 but it does not say anything about the engine.
-
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Re: Horse Power Question
The later models had a little more horsepower, mainly from higher rpm governors, but they also had different cams, as well as domed pistons and larger manifolds and carburetors. the increase is not huge however. As was mentioned earlier, it would be fun to mess with a hydrostat on a cub, but all the hydrostats I have ever dealt with consumed a lot of power themselves. Maybe I misstated that, I guess what I should have said was they were not very efficient in the transmission of power.
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
-
- 10+ Years
- Posts: 100
- Joined: Sun Jan 19, 2014 5:20 pm
- Zip Code: 64011
- Tractors Owned: 1973 International Cub S# 241812
Re: Horse Power Question
John *.?-!.* cub owner wrote:The later models had a little more horsepower, mainly from higher rpm governors, but they also had different cams, as well as domed pistons and larger manifolds and carburetors. the increase is not huge however. As was mentioned earlier, it would be fun to mess with a hydrostat on a cub, but all the hydrostats I have ever dealt with consumed a lot of power themselves. Maybe I misstated that, I guess what I should have said was they were not very efficient in the transmission of power.
The hydrostat would be an interesting thing to put on a cub. I wonder how out of place it would look.
So how different is a 1949 cub from a 1959 cub (not the low boy) not including obvious looks but the inside of the engine and everything internal?
-
- Cub Pro
- Posts: 7760
- Joined: Mon Jun 22, 2009 6:56 am
- Zip Code: 64070
- Tractors Owned: 1942 Farmall AV, serial #87025
1947 Farmall Circle Cub, serial #2116
1948 Farmall Cub, serial #46066 - Circle of Safety: Y
- Location: Lone Jack, MO
Re: Horse Power Question
Don't believe there's a lick of difference between a '49 and '59 engine. The "later models" John was referring to were built in the 1970's at the end of the Cub's production run.
-
- Similar Topics
- Replies
- Views
- Last post
-
- 11
- 424
-
by Matt Kirsch
Wed Nov 16, 2022 9:53 am
-
- 3
- 246
-
by CharlieK
Thu Jan 19, 2023 5:03 pm
-
- 8
- 218
-
by Larry in WNY
Sun Sep 18, 2022 6:42 pm
-
-
Farmall cub Loses power when hot. Attachment(s)
by RedFred » Sun Dec 11, 2022 12:11 am » in Farmall Cub - 41
- 2225
-
by RedFred
Wed Jan 25, 2023 10:37 am
-
-
-
c60 differences in cub, power unit and 154,185,184
by getitrunning » Wed Dec 13, 2023 5:56 pm » in Farmall Cub - 5
- 893
-
by outdoors4evr
Thu Dec 14, 2023 12:43 pm
-
Who is online
Users browsing this forum: No registered users and 5 guests