'59 Cub Lowboy clutch not completely releasing?

[Urbish]

Thanks everybody for your help on the clutch finger adjustment and measurements. Took me maybe an hour to pull off the mower deck and get under the Cub and make the adjustments. Easy to do and didn't take me much time at all. Maybe 15 minutes to make the actual adjustments on the three fingers. And now it works like new! I need to keep a copy of these instructions in my Cub Instruction Manual for future reference and keep the measuring tool I made with a bent tong off an old leaf rake in my Cub tool box. Thanks again everybody!

[LRiddle]

Awesome. I'm glad it worked out for you.

[pickerandsinger]

Great....Good Job....Dave

[Glen]

Hi,
Glad it works better, Don.
You should check the clutch pedal free play, after adjusting the fingers, it should have 1", measured at the top of it's travel, at the surface where your foot goes.
There might not be instructions in the 1959 Cub LoBoy owner's manual about it, I looked at it some.
Here is info from the 1957 LoBoy owner's manual.
Below that is the whole 1957 LoBoy owner's manual, it has more pages, and more info, than the 1959 manual.

http://farmallcub.com/rudi_cub/www.clea ... e%2057.jpg

http://farmallcub.com/rudi_cub/www.clea ... index.html