IMG_20201205_195106944~2_compress15.jpg
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
New guy
-
- 10+ Years
- Posts: 6170
- Joined: Mon Mar 19, 2012 7:33 pm
- Zip Code: 00000
- Tractors Owned: 1956 Farmall Cub with Fast Hitch, F-11 plow, Disc, Cultivator, Cub-22 mower
- Circle of Safety: Y
- Location: Wa.
Re: New guy
Hi,
The Cub owner's manual can help you learn about maintenance that the Cub needs.
Below is the 1949 Cub owner's manual. The experts on here recommend people read it. It has lots of info about operation, maintenance, and lubrication. There is a table of contents on page 1.
It shows how Cubs originally looked in it. The lube section begins on page 14.
http://farmallcub.com/rudi_cub/www.clea ... index.html
It shows the electrical system that a 1949 Cub originally had.
Cubs made before mid 1964 originally had 6 volt, positive ground electrical systems.
The 10 weight motor oil mentioned in the manual for the Touch Control was changed later to Case IH Hy-Tran fluid. It is sold at Case IH dealers.
There are other brands, be sure it works with IH hydraulic systems before buying one.
Below is a post I made about checking and changing the Touch Control fluid, and removing the air from the system.
viewtopic.php?f=1&t=106664
I would check or change all the oils before using the Cub. Using it with low oil in a gear housing can damage the parts in the housing.
There are 3 separate gear housings, with 3 separate oil levels to check, in the rear area of a Cub, the transmission, and 2 final drives.
The transmissions in Cubs commonly get water in them, from rain, or condensation inside the housing over time.
The air cleaner is an oil bath air cleaner. Dirt that is sucked in settles to the bottom of the oil cup. It should have clean, light motor oil in the oil cup to work right.
There is a search box at the top of the page, to the right of the Farmall Cub, you can find info in posts that have been made.
The Cub owner's manual can help you learn about maintenance that the Cub needs.
Below is the 1949 Cub owner's manual. The experts on here recommend people read it. It has lots of info about operation, maintenance, and lubrication. There is a table of contents on page 1.
It shows how Cubs originally looked in it. The lube section begins on page 14.
http://farmallcub.com/rudi_cub/www.clea ... index.html
It shows the electrical system that a 1949 Cub originally had.
Cubs made before mid 1964 originally had 6 volt, positive ground electrical systems.
The 10 weight motor oil mentioned in the manual for the Touch Control was changed later to Case IH Hy-Tran fluid. It is sold at Case IH dealers.
There are other brands, be sure it works with IH hydraulic systems before buying one.
Below is a post I made about checking and changing the Touch Control fluid, and removing the air from the system.
viewtopic.php?f=1&t=106664
I would check or change all the oils before using the Cub. Using it with low oil in a gear housing can damage the parts in the housing.
There are 3 separate gear housings, with 3 separate oil levels to check, in the rear area of a Cub, the transmission, and 2 final drives.
The transmissions in Cubs commonly get water in them, from rain, or condensation inside the housing over time.
The air cleaner is an oil bath air cleaner. Dirt that is sucked in settles to the bottom of the oil cup. It should have clean, light motor oil in the oil cup to work right.
There is a search box at the top of the page, to the right of the Farmall Cub, you can find info in posts that have been made.
Return to “Introduce Yourself”
Who is online
Users browsing this forum: No registered users and 1 guest