This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

Mccormick 100 Manure Spreader

Post your introduction and "get to know me" information in this forum.
Post Reply
mikesteinbrecher
Posts: 2
Joined: Thu Apr 08, 2021 3:40 am
Zip Code: 57025

Mccormick 100 Manure Spreader

Postby mikesteinbrecher » Thu Apr 08, 2021 3:50 am

Hi all,
I just pulled this spreader out of the fence line to start a restoration. Looking forward to interacting with you throughout my project.
Mike Steinbrecher
Elk Point, South Dakota
Top

SPONSOR AD

Sponsor

Sponsor
 
Top
Bob McCarty
Team Cub
Team Cub
Posts: 11859
Joined: Tue May 25, 2004 8:02 pm
Zip Code: 80501
Tractors Owned: Cubs, MH Pony, Shaw, Allis G, 1934 Silver King, JD LA and LI, Gibson D, David Bradley Tri-Trac
Circle of Safety: Y
Location: CO, Longmont

Re: Mccormick 100 Manure Spreader

Postby Bob McCarty » Thu Apr 08, 2021 9:05 am

Mike, Welcome to the Forum. There are a lot of us that have the 100, so let us know if you have any questions.
"We don't need to think more,
we need to think differently."
-Albert Einstein
Top
tj200
Posts: 3
Joined: Thu Apr 08, 2021 10:24 am
Zip Code: 00000

Re: Mccormick 100 Manure Spreader

Postby tj200 » Fri Apr 09, 2021 11:03 am

Good to know that many have the IH 100 manure spreader. I just picked up one myself. As far as parts go, I searched on the forum and found a post from almost 20 years ago with a vendor that is no longer in business. Aside from getting a spare for parts, are there any aftermarket options?
Top
Bob McCarty
Team Cub
Team Cub
Posts: 11859
Joined: Tue May 25, 2004 8:02 pm
Zip Code: 80501
Tractors Owned: Cubs, MH Pony, Shaw, Allis G, 1934 Silver King, JD LA and LI, Gibson D, David Bradley Tri-Trac
Circle of Safety: Y
Location: CO, Longmont

Re: Mccormick 100 Manure Spreader

Postby Bob McCarty » Fri Apr 09, 2021 11:21 am

Aside from the chains being available, I'm not aware of any sources for other new parts like sprockets, etc.
"We don't need to think more,
we need to think differently."
-Albert Einstein
Top
Post Reply

Return to “Introduce Yourself”

Who is online

Users browsing this forum: No registered users and 13 guests