new member

[mac mclaren]

hi ..thanks for letting me join ,,new member here from new zealand
just brought a famall b ,,its the model that runs on either petrol as well as kero ..
its a runner but hasnt gone for a few years so the process starts on restoring it ,,,starting off with renewing fluids ,,
so will keep you informede of the progress
thanks regards mac

[Dale Finch]

Welcome!!
There are a number of folks here with Farmall B's, who might be able to help with problems you come across. After your second post you will have access to many manuals. Here is a link to the A & B Parts Manual that might help:

http://farmallcub.com/rudi_cub/www.cleancomputes.com/Cub/A%20-%20B/index.html

Take LOTS of photos while you are working on your tractor...it will certainly help when you're reassembling!
And do post some photos when you get a chance...we LOVE photos!

[Stanton]

Welcome to the Forum, Mac!

Take some time and read through a few threads to acquaint yourself with the Forum:

• Welcome Wagon
• How to Upload Pictures to a Post
• Forum Picture Posting And Other Interesting Things You Can Do
• Using the Forum

Don't know if you have any of the manuals to your Farmall B, but now that you’ve logged your 2nd post you'll have access to the all the PDF Manuals on this site. There’s a few ways to do that:

• From a desktop or laptop, go to "Quick Links" in the upper left corner of your screen. Hit that and a pull-down appears where you'll find "PDF Manuals".
• You can also go to “Cub Info” in the upper toolbar, then hit “Rudi’s Manuals”. From there, you can access a variety of information.
• If you're using a phone, go to the "Links Directory" (second category down the main page). Once in "Links Directory" , scroll down to the second section "Tractor Parts & Manuals" and you'll find them there.

You'll be able to download an Owner's Manual (very strongly recommended) and any service manuals that interest you. Implement Manuals are also available.

Might also enjoy reading through this thread (even though it’s for a Cub, much can be applied to any tractor just brought home): What to do with a Cub you just brought home

We’d encourage you to take the Safety Test located in the Safety Forum: http://farmallcub.com/phpBB2/viewtopic.php?f=33&t=68084

Take some pictures of your tractor and post them, we’d like to see them.

Remember:

• When you have a specific question, start a new thread in the appropriate sub-forum (Farmall, IH, Case, Tractors - B's, F's, M's, Regulars, etc.).
• Before posting, use the Preview button before hitting Submit--it'll show you exactly what your post will look like, including pictures.
• When adding your comments to a thread, be sure to look at the date of the last poster. If it’s more than a 6 months old, the posters are probably not going to see it. Consider starting a new thread.

Glad you joined us.

[Bob McCarty]

Welcome to the forum.

[Pap]

Welcome Mac. Enjoy the ride. We are glad to have you.

[Mike in Louisiana]

Hello Mac, welcome to the forum.