Hi guys,
Does anyone know the size (ID) of the radiator overflow hose? It's not called out in the parts catalog and I don't see any vendors selling it. Going to take the old one down to the auto parts store, but some size hose is only sold in closed packages.....so knowing the size would make it easier.
Thanks,
Bob
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Radiator Overflow Hose Size
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 5+ Years
- Posts: 339
- Joined: Fri Dec 08, 2017 4:58 pm
- Zip Code: 20634
- Tractors Owned: 1959 Farmall Cub
1939 Farmall A
1975 John Deere 301
2015 Kubota BX25DLR
1952 Dodge M37 Weapons Carrier
1955 Willys M38A1 - Location: Great Mills, MD
-
- 5+ Years
- Posts: 339
- Joined: Fri Dec 08, 2017 4:58 pm
- Zip Code: 20634
- Tractors Owned: 1959 Farmall Cub
1939 Farmall A
1975 John Deere 301
2015 Kubota BX25DLR
1952 Dodge M37 Weapons Carrier
1955 Willys M38A1 - Location: Great Mills, MD
Re: Radiator Overflow Hose Size
Hi Bob,
Well........they don't make that type of radiator overflow hose anymore (shock!), as most vehicles switched to capturing any overflow and not letting it drip on the ground. That gave them an opportunity to sell you a special formed hose that they could charge way more than just straight hose. The hose you're looking for is a thin-wall type, identified by 4 ribs running length-wise along the hose. It's reproduced for muscle cars, but is stupid expensive and has an ID that's too big for the 140 radiator. The nipple on the radiator neck that it attaches to is 5/16 OD, so a 1/4" ID hose will work. Today you'll only find thick wall hose in that size, ie mostly fuel line.......but if you can find some windshield washer hose in that size it fits a bit better because it's OD is a little bit thinner than fuel line or vacuum line. The hood on the 140 doesn't leave much room for the hose to leave the nipple on the neck and dive under the hood opening, so you'll have to fiddle with the hood fit to keep the hood edge from cutting the new hose. The original hose is 30 inches long, so prepackaged 36" hose will work.
regards,
bob
Well........they don't make that type of radiator overflow hose anymore (shock!), as most vehicles switched to capturing any overflow and not letting it drip on the ground. That gave them an opportunity to sell you a special formed hose that they could charge way more than just straight hose. The hose you're looking for is a thin-wall type, identified by 4 ribs running length-wise along the hose. It's reproduced for muscle cars, but is stupid expensive and has an ID that's too big for the 140 radiator. The nipple on the radiator neck that it attaches to is 5/16 OD, so a 1/4" ID hose will work. Today you'll only find thick wall hose in that size, ie mostly fuel line.......but if you can find some windshield washer hose in that size it fits a bit better because it's OD is a little bit thinner than fuel line or vacuum line. The hood on the 140 doesn't leave much room for the hose to leave the nipple on the neck and dive under the hood opening, so you'll have to fiddle with the hood fit to keep the hood edge from cutting the new hose. The original hose is 30 inches long, so prepackaged 36" hose will work.
regards,
bob
-
- 5+ Years
- Posts: 339
- Joined: Fri Dec 08, 2017 4:58 pm
- Zip Code: 20634
- Tractors Owned: 1959 Farmall Cub
1939 Farmall A
1975 John Deere 301
2015 Kubota BX25DLR
1952 Dodge M37 Weapons Carrier
1955 Willys M38A1 - Location: Great Mills, MD
Re: Radiator Overflow Hose Size
Hey Bob........thanks for the info. I'll head down to the auto parts store in a bit an see if I can find some windshield washer hose. I know Prestone makes some that's pre-packaged.
Appreciate the help!
bob
Appreciate the help!
bob
-
- 5+ Years
- Posts: 339
- Joined: Fri Dec 08, 2017 4:58 pm
- Zip Code: 20634
- Tractors Owned: 1959 Farmall Cub
1939 Farmall A
1975 John Deere 301
2015 Kubota BX25DLR
1952 Dodge M37 Weapons Carrier
1955 Willys M38A1 - Location: Great Mills, MD
Re: Radiator Overflow Hose Size
Anytime brother..........that's what we're here for!!
Later,
bob
Later,
bob
-
- Similar Topics
- Replies
- Views
- Last post
-
-
12V battery size for a SAV or SA
by customcutter » Thu Jan 12, 2023 8:57 pm » in Farmall A, Super A, AV, 100, 130 & 140 - 6
- 215
-
by staninlowerAL
Mon Jan 16, 2023 4:24 pm
-
-
-
Bolt size questions
by ShawnAgne » Tue Nov 09, 2021 8:58 am » in Farmall A, Super A, AV, 100, 130 & 140 - 1
- 251
-
by inairam
Wed Nov 10, 2021 9:36 am
-
-
-
Super A Rear Rim Size Attachment(s)
by PoconoCub » Sat Aug 13, 2022 10:09 am » in Farmall A, Super A, AV, 100, 130 & 140 - 4
- 225
-
by PoconoCub
Sat Aug 13, 2022 9:22 pm
-
-
- 2
- 223
-
by SamsFarm
Mon Mar 14, 2022 1:22 pm
-
-
Carborator stud size
by inairam » Tue Oct 19, 2021 6:05 am » in Farmall A, Super A, AV, 100, 130 & 140 - 10
- 325
-
by inairam
Wed Oct 20, 2021 7:28 pm
-
Return to “Farmall A, Super A, AV, 100, 130 & 140”
Who is online
Users browsing this forum: Ike and 0 guests