Help Carter UT carb on SA

[BullDAWG]

What is the specs for the float on my 1950 UT Carter carb??? I cant find the carb # but it looks like it was OEM and it is the cast iron top type UT carter.

[Eugene]

http://fergusontractors.org/nfs/wp-cont ... letins.pdf

Above PDf manual for Carter carburetors. Should have information on setting the float.

[BullDAWG]

thanks, finally found the specs for the SA carter n it was slightly different than those u had, though it was only 1/32"ed (2/64") of an inch difference n they state that the float can be +/- 1/64" so basically the same. Also the main n idle screws had some minor differences but both have same range just a slight difference in where final fine tooning (example main on SA specs said to start at 2 turns out while yours said 3 and mine did best at 2 1/2, and idle said start at 2 turns on SA but 1 on yours and I'm still testing that to run as lean as possible (but still run well) so the plugs don't turn blackish while idling (sign of it running rich).