140 Drawbar

Farmall Super A, AV, 100, 130, & 140 1939 - 1973
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Posts: 18
Joined: Wed Mar 27, 2019 9:09 am
Zip Code: 83616

140 Drawbar

Postby id_birdhntr » Mon Jan 04, 2021 12:35 pm

I have a bent drawbar for my 140 that I plan on using for my No 27V sickle bar mower this summer. I am taking the bar to a machine shop to have it straightened but wanted to know if someone had the cut sheet for the drawbar that shows dimensions so we can make sure it's close to where it needs to be. I could mount the brackets back on to the final drives and then measure across as well but didn't know if someone had that specific dimension handy.


User avatar
10+ Years
10+ Years
Posts: 2499
Joined: Sun Feb 17, 2008 2:38 am
Zip Code: 07727
Tractors Owned: 1 -'58 International Cub Lo-Boy
2 - '46 International A's
2 - '52 Farmall Cubs
1 - '53 Farmall Super A
1 - ‘41 Ford 9N with a ‘49 8N Engine
1 - ‘48 (5641) Allis Chalmers G
Location: Farmingdale NJ

Re: 140 Drawbar

Postby Lt.Mike » Mon Jan 11, 2021 7:33 pm

Have you taken it to the shop yet?
I picked up a 20 press from harbor freight on sale for $150 that I know would do the job.
Don’t know what they’ll charge you but if you bought the press and did it yourself you’d have the press for other chores down the road.
Quote by Gary Pickeral I like
"If it can cast a shadow, it can be restored"

  • Similar Topics
    Last post

Return to “Farmall A, Super A, AV, 100, 130 & 140”

Who is online

Users browsing this forum: No registered users and 1 guest