Farmall a rewire

[Magnum]

I have an A . i bought this with a 12v system which was junk, so i removed the alt and bought a 6v gen off a super A that was being parted out. So my question is will the wiring be the same on the a as it is on the cub ? The gen looks exactly the same as the cub gen .

[John *.?-!.* cub owner]

An A would have had a cutout mounted on the generator,and the charge rate controlled by the headlight switch, But I do not know if a Super A used the same setup, or had a voltage regulator. However, the 6 volt wiring diagram for the Super A, cub, A,B, C, H, M were all the same as to the wiring, but components located in different places.

[Jim Becker]

Yes, the connections are the same. If you go to the PDF manuals, there is a manual for installing electrical systems on an A. It has the diagram and also has illustrations of where the cables are to be routed.

Follow this path:

[Farmall A, Super A, AV, 100, 130 and 140]
[Attachment Manuals]
Farmall A & B Special Attachments - lighting

[Magnum]

Thanks John for the heads up on the switch being a key part on this rewire. Looks like I'll need a few more items to properly do this.
Jim thank you for the link , but for one reason or another it does not work for me.

[Jim Becker]

Are you trying to access it with a phone or a PC? Some other people have had problems using a phone.

[Magnum]

Are you trying to access it with a phone or a PC? Some other people have had problems using a phone.

Tablet.

[Magnum]

Are you trying to access it with a phone or a PC? Some other people have had problems using a phone.

Tablet.

I can log on with a pc.

[Jim Becker]

Are you trying to access it with a phone or a PC? Some other people have had problems using a phone.

Tablet.

I can log on with a pc.

Problem solved!