Got the 100 home very strong running tractor but definitely needs some TLC. So here are the questions.
1. I thought I've seen on here (may be wrong) someone that makes new name plates. If so who do I contact?
2. The tractor runs great, but the exhaust portion of the manifold is heavily pitted. Since I'm going to be repainting it and making it look nice it should I replace it? Guessing the answer is you can but don't have to since it works.
3. What type of oil filters does the C123 motor use? The bell that holds the filters appears to be the same since as that on my 300, so do they use the same?
Thanks in advance
Shawn Agne
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Questions before I start to restore
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 5+ Years
- Posts: 846
- Joined: Sat May 07, 2016 5:13 pm
- Zip Code: 45380
- Tractors Owned: 1952 Cub w/ 184 motor (Kid)
12V with Petronix
IH 3160 Mower Deck
54 Leveling Blade
193 Plow
IH528 Trailer
Front/Rear Weights
1955 Farmall 300 (Clarence)
12V with Petronix
Woods L306 72"
1955 Farmall 100 (Thomas)
12V with Petronix
Woods L59 60"
A60 Leveling Blade
Front/Rear Weights - Circle of Safety: Y
- Location: Versailles, Ohio
Questions before I start to restore
Shawn Agne
-
- Team Cub Mentor
- Posts: 17489
- Joined: Mon Feb 03, 2003 6:45 am
- Zip Code: 21550
- Tractors Owned: "1950 Something" Farmall Cub
1957 Farmall Cub w/FH
1977 International Cub w/FH
1978 International Cub
1948 Farmall Super A - Circle of Safety: Y
- Location: MD, Deep Creek Lake
Re: Questions before I start to restore
1. Mrs. Robert Diener, 304-599-4027
2. Keep it.
3. NAPA 1172 or equivalent
2. Keep it.
3. NAPA 1172 or equivalent
-
- 5+ Years
- Posts: 2823
- Joined: Wed Jul 08, 2015 10:24 am
- Zip Code: 19342
- Tractors Owned: 1948 6v - Dozer
1949 with kub klipper belly mower. mag 6v - Mom
1950 with plow, 54 blade, mott mag 6v - Roxanne
1953 54 blade, c22, wood 42 6v
1957 6v - barn Queen
1965 lo-boy with c-3 mower 12 v - Loboy
1974 Horse II 12 v c-2
1975 with woods 42-6 12 v - Horse
1979 long strip 12 v stuck engine
130 with international 1000 loader 6 v
1969 140 with bush hog tow behind mower 12 v
Terramite T-6 4WD Backhoe Perkins diesel
Memberships: Rough and Tumble Engineers Historical Association;Chapter 8 IH Collectors; IH Collectors Worldwide - Circle of Safety: Y
- Location: Glen Mills PA
Re: Questions before I start to restore
When I started I replaced things. Now I clean it up best i can and go with it. It shows its age but it works. I like that in a tractor.
When you only have 9 horsepower you need to know the names of all of the ponies!
-
- Similar Topics
- Replies
- Views
- Last post
-
- 10
- 528
-
by bt73000
Tue Sep 21, 2021 2:25 pm
-
-
47 farmall a hard start
by Jack jr » Sun Jun 27, 2021 5:11 am » in Farmall A, Super A, AV, 100, 130 & 140 - 11
- 634
-
by Jack jr
Sun Oct 17, 2021 5:57 pm
-
-
-
48 Super A stalled under load...won't start now...ideas?
by smokeybear » Wed Oct 13, 2021 6:38 pm » in Farmall A, Super A, AV, 100, 130 & 140 - 6
- 280
-
by smokeybear
Fri Oct 15, 2021 3:19 pm
-
-
-
Super AV, Cub, and C questions?
by customcutter » Sun Jan 08, 2023 1:11 pm » in Farmall A, Super A, AV, 100, 130 & 140 - 16
- 372
-
by customcutter
Thu Jan 12, 2023 10:26 pm
-
-
-
New Addition and questions
by Rick Spivey » Sat Jan 28, 2023 9:33 am » in Farmall A, Super A, AV, 100, 130 & 140 - 6
- 290
-
by ShawnAgne
Mon Jan 30, 2023 8:49 pm
-
Return to “Farmall A, Super A, AV, 100, 130 & 140”
Who is online
Users browsing this forum: No registered users and 1 guest