Swinging drawbar anchor

Farmall Super A, AV, 100, 130, & 140 1939 - 1973
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
nomad
10+ Years
10+ Years
Posts: 87
Joined: Tue May 18, 2010 7:27 pm
Zip Code: 06443
Location: Madison Connecticut

Swinging drawbar anchor

Postby nomad » Tue Nov 23, 2021 5:47 pm

Hi All. I have a swinging draw bar anchor that seems too tight to fit under my 140. Based on what’s for sale on the web it looks like the right piece. But I can’t remember if I bought it as a farmall A or a 140 anchor. Perhaps I am missing brackets or something? If there is a diagram or picture on how it attaches I would be very grateful. Thanks!
Top
Jim Becker
Team Cub
Team Cub
Posts: 17109
Joined: Sun Feb 02, 2003 2:59 pm
Zip Code: 55319
Circle of Safety: Y
Location: MN

Re: Swinging drawbar anchor

Postby Jim Becker » Tue Nov 23, 2021 8:10 pm

The cross bar for an A has a plain hole in each end. The cross bar for the Super A through 140 has a slotted and countersunk hole on each end so it can be hung on the attachment studs and tightened in place with a tapered nut. There are no additional brackets and the bar should just fit between the two final drive housings.
Top
nomad
10+ Years
10+ Years
Posts: 87
Joined: Tue May 18, 2010 7:27 pm
Zip Code: 06443
Location: Madison Connecticut

Re: Swinging drawbar anchor

Postby nomad » Fri Nov 26, 2021 9:04 am

Thank you! Can’t remember where I put the anchor down and was running out of time so I used the cub. Hopefully I’ll get things right for the Spring
Top
  • Similar Topics
    Replies
    Views
    Last post

Return to “Farmall A, Super A, AV, 100, 130 & 140”

Who is online

Users browsing this forum: No registered users and 1 guest