Touch Control thoughts

Farmall Super A, AV, 100, 130, & 140 1939 - 1973
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
User avatar
5+ Years
5+ Years
Posts: 837
Joined: Sat May 07, 2016 5:13 pm
Zip Code: 45380
Tractors Owned: 1952 Cub w/ 184 motor (Kid)
12V with Petronix
IH 3160 Mower Deck
54 Leveling Blade
193 Plow
IH528 Trailer
Front/Rear Weights
1955 Farmall 300 (Clarence)
12V with Petronix
Woods L306 72"
1955 Farmall 100 (Thomas)
12V with Petronix
Woods L59 60"
A60 Leveling Blade
Front/Rear Weights
Circle of Safety: Y
Location: Versailles, Ohio

Touch Control thoughts

Postby ShawnAgne » Sat Nov 27, 2021 9:44 am

Prior to the rebuild the 100 TC held the L59 deck like a champ. Got everything back together hooked up the A60 and what I'm noticing is if I raise the plow it slowly drops. However if I run the left control lever for the other TC cylinder it holds no problem. So here is what I'm wondering
1. Is this still air in the system?
2. I'm not leaking fluid but is there something leaking in the TC system?
3. Does the pressure release valve on the auxiliary cylinder over ride the 100 TC system and does it just need to be turned up?

Since the left (non-driver) moving it seems to stabilize the lift side it makes me think it is #1.
If it is #2 any ideas what it would be and how indepth it would be to fix it?
Shawn Agne

  • Similar Topics
    Last post

Return to “Farmall A, Super A, AV, 100, 130 & 140”

Who is online

Users browsing this forum: No registered users and 2 guests