This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

Help ID things on Farmall tear down

Farmall Super A, AV, 100, 130, & 140 1939 - 1973
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Post Reply
RRicks1970
Posts: 20
Joined: Tue Dec 28, 2021 8:05 pm
Zip Code: 32052

Help ID things on Farmall tear down

Postby RRicks1970 » Tue Jan 04, 2022 1:40 pm

I'm tearing down a 52 super a. I've never seen this notched selector plate before. Ive already removed the throttle position plate . Anyone with a clue?
Attachments
IMG_20220104_132638168~2.jpg
Top

SPONSOR AD

Sponsor

Sponsor
 
Top
User avatar
Don McCombs
Team Cub Mentor
Team Cub Mentor
Posts: 17477
Joined: Mon Feb 03, 2003 6:45 am
Zip Code: 21550
Tractors Owned: "1950 Something" Farmall Cub
1957 Farmall Cub w/FH
1977 International Cub w/FH
1978 International Cub
1948 Farmall Super A
Circle of Safety: Y
Location: MD, Deep Creek Lake

Re: Help ID things on Farmall tear down

Postby Don McCombs » Tue Jan 04, 2022 3:51 pm

Shutter control for distillate option?
Don McCombs
MD, Deep Creek Lake

Image
Proud Member of Maryland Chapter 39

The best teachers are those who show you where to look, but don't tell you what to see.
A. K. Trenfor
Top
RRicks1970
Posts: 20
Joined: Tue Dec 28, 2021 8:05 pm
Zip Code: 32052

Re: Help ID things on Farmall tear down

Postby RRicks1970 » Tue Jan 04, 2022 4:03 pm

And what did this gauge show? I got where the water temp, oil pressure and ammeter gauges go but this one baffles me.
Attachments
IMG_20220104_132638168~3.jpg
Top
RRicks1970
Posts: 20
Joined: Tue Dec 28, 2021 8:05 pm
Zip Code: 32052

Re: Help ID things on Farmall tear down

Postby RRicks1970 » Tue Jan 04, 2022 7:07 pm

Ok. I managed to ID the position selector as being a "P SECTOR, radiator shutter control". Not much call for radiator shutters in north Florida which explains why I've never seen one before. That will be going into the useless to me parts pile.

Still don't know about the gauge on top of the hydraulic controls. Unless it was to do with hydraulic fluid/pressure/temp...etc.
Top
Jim Becker
Team Cub
Team Cub
Posts: 17272
Joined: Sun Feb 02, 2003 2:59 pm
Zip Code: 55319
Circle of Safety: Y
Location: MN

Re: Help ID things on Farmall tear down

Postby Jim Becker » Tue Jan 04, 2022 9:46 pm

Shutters were often installed as part of the distillate fuel option, although also available as a separate attachment. The mystery gauge is for hydraulic fluid temperature.
Top
RRicks1970
Posts: 20
Joined: Tue Dec 28, 2021 8:05 pm
Zip Code: 32052

Re: Help ID things on Farmall tear down

Postby RRicks1970 » Tue Jan 04, 2022 9:55 pm

Jim Becker wrote:Shutters were often installed as part of the distillate fuel option, although also available as a separate attachment. The mystery gauge is for hydraulic fluid temperature.
So now I have to figure out where the sensor would go. My 51 didn't have a hydraulic gauge and now I want one. I would assume there is a plug in the models that didn't have a gauge?
Top
Jim Becker
Team Cub
Team Cub
Posts: 17272
Joined: Sun Feb 02, 2003 2:59 pm
Zip Code: 55319
Circle of Safety: Y
Location: MN

Re: Help ID things on Farmall tear down

Postby Jim Becker » Tue Jan 04, 2022 10:08 pm

Put your finger on the Touch-Control filler plug. Slide it down until it is near the bottom of the Touch-Control block. You will find a plate held with 4 bolts. The sender is in the middle of the plate,
Top
RRicks1970
Posts: 20
Joined: Tue Dec 28, 2021 8:05 pm
Zip Code: 32052

Re: Help ID things on Farmall tear down

Postby RRicks1970 » Tue Jan 04, 2022 11:06 pm

Jim Becker wrote:Put your finger on the Touch-Control filler plug. Slide it down until it is near the bottom of the Touch-Control block. You will find a plate held with 4 bolts. The sender is in the middle of the plate,
I will do that sir, as soon as I get off work in the morning and get to the house. Thank you.
Top
Post Reply

Return to “Farmall A, Super A, AV, 100, 130 & 140”

Who is online

Users browsing this forum: No registered users and 15 guests