Who wanted the A60 blade part dimensions?

Farmall Super A, AV, 100, 130, & 140 1939 - 1973
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
User avatar
ShawnAgne
5+ Years
5+ Years
Posts: 771
Joined: Sat May 07, 2016 5:13 pm
Zip Code: 45380
Tractors Owned: 1952 Cub w/ 184 motor (Kid)
12V with Petronix
IH 3160 Mower Deck
54 Leveling Blade
193 Plow
IH528 Trailer
Front/Rear Weights
1955 Farmall 300 (Clarence)
12V with Petronix
Woods L306 72"
1955 Farmall 100 (Thomas)
12V with Petronix
Woods L59 60"
A60 Leveling Blade
Front/Rear Weights
Circle of Safety: Y
Location: Versailles, Ohio

Who wanted the A60 blade part dimensions?

Postby ShawnAgne » Mon Jan 24, 2022 7:52 am

Remember this fall someone was wanting A60 dimensions and pictures. Don't remember who or the post. Let me know what it is you were needing.
Shawn Agne

VAfarmallguy87
Posts: 9
Joined: Fri Oct 08, 2021 7:49 pm
Zip Code: 22801
Tractors Owned: 48 Farmall SA
53 Ford Golden Jubilee
Location: Virginia

Re: Who wanted the A60 blade part dimensions?

Postby VAfarmallguy87 » Fri Jan 28, 2022 9:20 am

That was me! I have been busy and haven't been on the forum in a while. I am looking for the dimensions of the frame work and the length of the arms/rods to duplicate it. I may have an actual a60 to buy locally and it may be spring before the guy is able to pull it out of his shed. I still want the dimensions so I can possibly build a frame in case the guy takes too long to get his stuff dug out he is wanting to let go. Thanks for remembering me on those dimensions. I will be checking in every evening to read up on stuff for my super a.
:tractor: Josh

User avatar
Lt.Mike
10+ Years
10+ Years
Posts: 2432
Joined: Sun Feb 17, 2008 2:38 am
Zip Code: 07727
Tractors Owned: 1 -'58 International Cub Lo-Boy
2 - '46 International A's
2 - '52 Farmall Cubs
1 - '53 Farmall Super A
1 - ‘41 Ford 9N with a ‘49 8N Engine
1 - ‘48 (5641) Allis Chalmers G
Location: Farmingdale NJ

Re: Who wanted the A60 blade part dimensions?

Postby Lt.Mike » Sun Jan 30, 2022 6:51 pm

If you build your own plow frame you can improve on the IH design by beefing up on the beams that reach back to the hanger bar. They have a tendency to bow upwards under the pressure.
Mine was straightened by the prior owned and a length of angle iron was welded on top.
Quote by Gary Pickeral I like
"If it can cast a shadow, it can be restored"

User avatar
ShawnAgne
5+ Years
5+ Years
Posts: 771
Joined: Sat May 07, 2016 5:13 pm
Zip Code: 45380
Tractors Owned: 1952 Cub w/ 184 motor (Kid)
12V with Petronix
IH 3160 Mower Deck
54 Leveling Blade
193 Plow
IH528 Trailer
Front/Rear Weights
1955 Farmall 300 (Clarence)
12V with Petronix
Woods L306 72"
1955 Farmall 100 (Thomas)
12V with Petronix
Woods L59 60"
A60 Leveling Blade
Front/Rear Weights
Circle of Safety: Y
Location: Versailles, Ohio

Re: Who wanted the A60 blade part dimensions?

Postby ShawnAgne » Fri Feb 04, 2022 11:55 am

VAfarmallguy87 wrote:That was me! I have been busy and haven't been on the forum in a while. I am looking for the dimensions of the frame work and the length of the arms/rods to duplicate it. I may have an actual a60 to buy locally and it may be spring before the guy is able to pull it out of his shed. I still want the dimensions so I can possibly build a frame in case the guy takes too long to get his stuff dug out he is wanting to let go. Thanks for remembering me on those dimensions. I will be checking in every evening to read up on stuff for my super a.


Just logged in after awhile, I'll go out and measure and send pics either today or sometime this weekend. After about 5 hours plowing this morning not feeling like going outside for awhile.
Shawn Agne

VAfarmallguy87
Posts: 9
Joined: Fri Oct 08, 2021 7:49 pm
Zip Code: 22801
Tractors Owned: 48 Farmall SA
53 Ford Golden Jubilee
Location: Virginia

Re: Who wanted the A60 blade part dimensions?

Postby VAfarmallguy87 » Fri Feb 04, 2022 9:42 pm

I understand the plowing snow. We had snow for like a month here in the Shenandoah Valley and it kept me busy. All I have for plowing is my old Ford Jubilee with a rear mounted 3 point blade and that thing wears me out getting off and on to adjust the angle of the blade. When I finally get a blade on the super a I am doing the power angle adjustment. I will look into that project later. Thanks for your time!
:tractor: Josh


  • Similar Topics
    Replies
    Views
    Last post

Return to “Farmall A, Super A, AV, 100, 130 & 140”

Who is online

Users browsing this forum: No registered users and 1 guest