This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Sirfive’s super A project.
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- Posts: 17
- Joined: Mon Jan 24, 2022 5:56 am
- Zip Code: 78006
Re: Sirfive’s super A project.
Thank you. That looks more like it, my rad cap is missing the plate with tabs on the inside.
- Dale Finch
- 10+ Years
- Posts: 6677
- Joined: Tue Apr 27, 2010 11:34 am
- Zip Code: 27517
- Tractors Owned: '51 Cub #140966 "Bruno" with Woods 59 mower
'55 Cub #187541 "Betty" with Fast Hitch
'55 Cub #190482 "Ben" with Woods 42 mower
'55 Cub #191739 "Bertha" with Woods 42 mower
'56 Cub #194370 "Boris" with Mott Flail mower - Circle of Safety: Y
- Location: NC, Chapel Hill
Re: Sirfive’s super A project.
One think I will point out...I replaced the cap on my SA with Steiner's cap, and the underside very quickly started rusting. I don't really know if there is a better source. I was worried the rust particles, as I took it off and on, would get indide the radiator.
Maybe someone else has a better source?
Maybe someone else has a better source?
-
- Posts: 44
- Joined: Wed Oct 20, 2021 5:21 pm
- Zip Code: 17512
- Tractors Owned: 57' Cub
45’ A
48' Super A
51' Super A
53' Super C
51’ H
50' M
60' IH 460 Utility
Re: Sirfive’s super A project.
If you need a gas cap try this… https://www.ihgascap.com/. It does take awhile to get one.
-
- 501 Club
- Posts: 1853
- Joined: Wed Jan 20, 2021 8:21 pm
- Zip Code: 44410
- Tractors Owned: 1968 Cub Fast Hitch
LF-1 Platform Carrier
144 Cultivators
L-F194 Plow(s)
F38 Disk
L-F3 Spring Tooth Harrow
CS Bell No. 60 Grain Mill on a unmodified Fast Hitch Disk hitch prong
Home Made Fast Hitch Potato Plow
54A Blade
Couple 1948 Cubs
172 Runner Planter
53 Fertilizer
Cub-3 Field Cultivator
Cub-189 Two Way Plow
Cub-22 Sickle Bar Mower
Mechanical Transplanter with side mount barrel (needs a fast hitch adapter) :)
Misc Belly Mowers
Wish List
International 100 Fast Hitch Blade
Mott Fast Hitch Flail Mower
Wish Wish Wish List
Fast Hitch Rotary Hoe
4E hammer mill - Location: Ne Ohio
Re: Sirfive’s super A project.
Sirfive wrote:Do pics only stick around for a few days? The pic in my introduction thread seems to have disappeared.
If you post them on here on farmallcub.com, they should be here for eternity.
If you post to some image hosting service, and link them to here, then your guess is as good as mine!
1968 Cub Fast-Hitch
-
- Posts: 17
- Joined: Mon Jan 24, 2022 5:56 am
- Zip Code: 78006
Re: Sirfive’s super A project.
My pics are too big to host here.
Got a mix of marvel mystery oil and sae30 in the cylinders, cleaned and gapped the plugs, and oiled the fan bearing and starter & generator cups. About to order some filters and gaskets, and enter my info for the gas cap. Cylinder and piston crowns look good. Compression is good. I cant believe this thing has sat for so long, and everything is as nice as it is.
Thanks for all the help this far.
Got a mix of marvel mystery oil and sae30 in the cylinders, cleaned and gapped the plugs, and oiled the fan bearing and starter & generator cups. About to order some filters and gaskets, and enter my info for the gas cap. Cylinder and piston crowns look good. Compression is good. I cant believe this thing has sat for so long, and everything is as nice as it is.
Thanks for all the help this far.
- Don McCombs
- Team Cub Mentor
- Posts: 17479
- Joined: Mon Feb 03, 2003 6:45 am
- Zip Code: 21550
- Tractors Owned: "1950 Something" Farmall Cub
1957 Farmall Cub w/FH
1977 International Cub w/FH
1978 International Cub
1948 Farmall Super A - Circle of Safety: Y
- Location: MD, Deep Creek Lake
Re: Sirfive’s super A project.
I use an app called Irfanview to resize photos.
-
- Posts: 17
- Joined: Mon Jan 24, 2022 5:56 am
- Zip Code: 78006
Re: Sirfive’s super A project.
Havent tested for spark yet, but gonna keep the points, 6v, and backwards connection until i have any trouble.
But a 12v neg ground system would be smarter, right? At least for plugging in a phone charger, but led lights, electric fans and water pumps? Wouldnt a conversion make all that stuff easier? The electric ignition kit for 6v backwards was more expensive, just in case.
I’m just overthinking it, for the sake of thinking about it. Like i said, if nothing is broke i wont change it yet.
Anyone with a gas A know gallons per hour when loaded? Anyone run a pto driven generator have any tips or tricks?
Would a lead substitute help if it were leaned out?
But a 12v neg ground system would be smarter, right? At least for plugging in a phone charger, but led lights, electric fans and water pumps? Wouldnt a conversion make all that stuff easier? The electric ignition kit for 6v backwards was more expensive, just in case.
I’m just overthinking it, for the sake of thinking about it. Like i said, if nothing is broke i wont change it yet.
Anyone with a gas A know gallons per hour when loaded? Anyone run a pto driven generator have any tips or tricks?
Would a lead substitute help if it were leaned out?
-
- 501 Club
- Posts: 1853
- Joined: Wed Jan 20, 2021 8:21 pm
- Zip Code: 44410
- Tractors Owned: 1968 Cub Fast Hitch
LF-1 Platform Carrier
144 Cultivators
L-F194 Plow(s)
F38 Disk
L-F3 Spring Tooth Harrow
CS Bell No. 60 Grain Mill on a unmodified Fast Hitch Disk hitch prong
Home Made Fast Hitch Potato Plow
54A Blade
Couple 1948 Cubs
172 Runner Planter
53 Fertilizer
Cub-3 Field Cultivator
Cub-189 Two Way Plow
Cub-22 Sickle Bar Mower
Mechanical Transplanter with side mount barrel (needs a fast hitch adapter) :)
Misc Belly Mowers
Wish List
International 100 Fast Hitch Blade
Mott Fast Hitch Flail Mower
Wish Wish Wish List
Fast Hitch Rotary Hoe
4E hammer mill - Location: Ne Ohio
Re: Sirfive’s super A project.
Sirfive wrote:My pics are too big to host here.
I text mine to a friend and he sends them back.
Then I can post them here! It's a pain, but works!
I made the suggestion of a automatic pic resizer ⬇️
http://farmallcub.com/phpBB2/viewtopic.php?f=20&t=110438&sid=07a854e61973b4a4d5a55ed9f6c73613
I guess there is not enough squeeky wheels to get and grease!
1968 Cub Fast-Hitch
-
- Posts: 17
- Joined: Mon Jan 24, 2022 5:56 am
- Zip Code: 78006
Re: Sirfive’s super A project.
I’m on a tundra forum, posting pics there makes em small enough to post here.
-
- Posts: 17
- Joined: Mon Jan 24, 2022 5:56 am
- Zip Code: 78006
Re: Sirfive’s super A project.
My serial number, on the number plate under the seat, is stamped ‘FAA’ before the number, does that mean anything?
Do i include that when submiting my request for the new gascap? Or was it added later? It’s hand stamped. Crooked and deep.
Edit: i found it. Means ‘super a or a’.
Do i include that when submiting my request for the new gascap? Or was it added later? It’s hand stamped. Crooked and deep.
Edit: i found it. Means ‘super a or a’.
-
- Team Cub Mentor
- Posts: 5637
- Joined: Thu Aug 03, 2006 6:20 am
- Zip Code: 43358
- Tractors Owned: 48 Cub Diesel (Cubota)
53 Cockshutt 20 restored (Shooter)
52 Cockshutt 20 unrestored
47 Leader "B" (Herckie)
49 Leader "D" (Princess)
49 Leader "D" very rough
48 Leader "D" unrestored
Kubota B6200E
Kubota B6200HST
Kubota B8200HST-D - Circle of Safety: Y
- Location: OH West Mansfield
Re: Sirfive’s super A project.
Yes, I think you include that on your request.
- ricky racer
- 10+ Years
- Posts: 6336
- Joined: Wed Sep 12, 2007 8:40 pm
- Zip Code: 49120
- Circle of Safety: Y
- Location: Niles / Buchanan, Michigan
Re: Sirfive’s super A project.
Sirfive wrote:E87F1028-1836-46C1-AEAA-5D3B6C7E2C3F.jpeg
I’m on a tundra forum, posting pics there makes em small enough to post here.
That's a great looking picture! It looks like a really nice Super A too!
1929 Farmall Regular
1935 John Deere B
1937 John Deere A
1941 John Deere H
1952 John Deere B
1953 Farmall Cub
1935 John Deere B
1937 John Deere A
1941 John Deere H
1952 John Deere B
1953 Farmall Cub
-
- Posts: 17
- Joined: Mon Jan 24, 2022 5:56 am
- Zip Code: 78006
Re: Sirfive’s super A project.
Thanks! Its a very nice tractor. I’m waiting on an oil filter, and need to clean the inside of the fuel tank, maybe line it with something, and get a battery. I’ll be excited to get it running.
Return to “Farmall A, Super A, AV, 100, 130 & 140”
Who is online
Users browsing this forum: No registered users and 7 guests