I’m searching for clutch kits. My local guy I deal with is right in line with Steiner and other parts houses which is $250-300. I found (link provided) a kit from yesterday’s tractors for $140. Does anyone have any expierence with this product or the reason why it’s $110-160 cheaper?
http://www.yesterdaystractors.com/cgi-b ... ch&r=mcats
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Clutch kit
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
punchofdeath
- 5+ Years
- Posts: 119
- Joined: Sun May 28, 2017 3:42 pm
- Zip Code: 25617
- Tractors Owned: 1956 Cub
- Circle of Safety: Y
- Location: Southern West Virginia
Re: Clutch kit
I got a clutch kit for a farmall cub from yesterday’s tractors and it’s had plenty of use and I haven’t had a problem. Only problem was the pilot bushing was too tight and wouldn’t let the clutch disengage. Had to split tractor again and sand it out a little bit. I think I installed it around March.
Caleb
-
2wheelsadam
- 5+ Years
- Posts: 16
- Joined: Mon Oct 29, 2018 11:06 am
- Zip Code: 12456
Re: Clutch kit
my clutch kit I just got comes with new throw out bearing. The old one in tractor is not a bearing but is graphite. I had to order the new updated throw out bearing holder ($ 80.00) for the new bearing. Just be aware.
Return to “Farmall C, Super C, 200 & 230”
Who is online
Users browsing this forum: No registered users and 6 guests
