I bought some stuff at the auction yesterday and unloaded the trailer today! The loader worked. It was a little light on capacity, but I was able to rotate the bucket to get the bush hog up.
I wonder if there is a problem since I couldn't lift it with the arm. I could hear the high pressure bypass letting fluid through. I had the throttle all the way up. I imagine the bush hog weighs 250 lbs or so.
What do you guys think?
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Used the 1000 Loader Today!!!
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 527
- Joined: Sat Jul 17, 2010 10:41 am
- Zip Code: 46163
- Tractors Owned: 1948 Cub "Moe"
1950 Farmall M
1978 IH 184 - Circle of Safety: Y
- Location: New Castle, IN
-
- Cub Pro
- Posts: 2461
- Joined: Mon Feb 17, 2003 7:53 am
- Zip Code: 47906
- eBay ID: steveb05
- Tractors Owned: 1947 in well used condition
1948 restored
Nice original 1950 just out of the Demo Range
628 2 wheel Trailer
1950 Demo
Tryke
Rat Cub - Circle of Safety: Y
- Location: IN West Lafayette
Re: Used the 1000 Loader Today!!!
there is a presure relief on the loader valve you may want to adjust to get some add lifting power.
Be prepared to be unprepared Seth Goden
-
- 10+ Years
- Posts: 527
- Joined: Sat Jul 17, 2010 10:41 am
- Zip Code: 46163
- Tractors Owned: 1948 Cub "Moe"
1950 Farmall M
1978 IH 184 - Circle of Safety: Y
- Location: New Castle, IN
Re: Used the 1000 Loader Today!!!
OK, I will look through the operator's manual today.
-
- Cub Pro
- Posts: 2461
- Joined: Mon Feb 17, 2003 7:53 am
- Zip Code: 47906
- eBay ID: steveb05
- Tractors Owned: 1947 in well used condition
1948 restored
Nice original 1950 just out of the Demo Range
628 2 wheel Trailer
1950 Demo
Tryke
Rat Cub - Circle of Safety: Y
- Location: IN West Lafayette
Re: Used the 1000 Loader Today!!!
It will be under the Acorn Nut on the left side of the valve.
Be prepared to be unprepared Seth Goden
-
- 10+ Years
- Posts: 1080
- Joined: Mon Feb 03, 2003 1:15 pm
- Location: St. Charles, MI 48655
Re: Used the 1000 Loader Today!!!
do you have a fast hitch brush hog on that tractor? 4' or 5'? I want to get one for mine or make one!
chad
I have a loader on my 1955 100 and love it! I can pick up a 8' tandem disk with my loader just have to be careful and go slow.
chad
I have a loader on my 1955 100 and love it! I can pick up a 8' tandem disk with my loader just have to be careful and go slow.
"don't find fault, find a remedy"
1948 Cub, 1945 A, 1955 100
1948 Cub, 1945 A, 1955 100
-
- 10+ Years
- Posts: 527
- Joined: Sat Jul 17, 2010 10:41 am
- Zip Code: 46163
- Tractors Owned: 1948 Cub "Moe"
1950 Farmall M
1978 IH 184 - Circle of Safety: Y
- Location: New Castle, IN
Re: Used the 1000 Loader Today!!!
I have 2 fast hitch bush hogs. I am looking to sell one of them.
PM sent...
PM sent...
-
- 10+ Years
- Posts: 1080
- Joined: Mon Feb 03, 2003 1:15 pm
- Location: St. Charles, MI 48655
Re: Used the 1000 Loader Today!!!
pm sent back I think I will take it
"don't find fault, find a remedy"
1948 Cub, 1945 A, 1955 100
1948 Cub, 1945 A, 1955 100
-
- 10+ Years
- Posts: 527
- Joined: Sat Jul 17, 2010 10:41 am
- Zip Code: 46163
- Tractors Owned: 1948 Cub "Moe"
1950 Farmall M
1978 IH 184 - Circle of Safety: Y
- Location: New Castle, IN
Re: Used the 1000 Loader Today!!!
OK, I went out and adjusted the pressure relief today after work. It is running really well now. I adjusted it so that it would just pick up the bush hog without bypassing at all. I don't have a 1500 PSI gauge. I also ran both rams against a stop and the hoses held, so the relief is still doing it's job.
Maybe I will be able to rig up a high pressure gauge from work and check the pressure. I'll have to look for one.
Maybe I will be able to rig up a high pressure gauge from work and check the pressure. I'll have to look for one.
-
- 10+ Years
- Posts: 1080
- Joined: Mon Feb 03, 2003 1:15 pm
- Location: St. Charles, MI 48655
Re: Used the 1000 Loader Today!!!
I may have a gauge for you!
"don't find fault, find a remedy"
1948 Cub, 1945 A, 1955 100
1948 Cub, 1945 A, 1955 100
-
- Similar Topics
- Replies
- Views
- Last post
-
-
New to me B414 with a 2001 loader!
by Timeisrelative » Wed Apr 24, 2024 6:41 pm » in Farmall / IH / CASE - 3
- 127
-
by Timeisrelative
Sat Apr 27, 2024 8:15 am
-
Return to “Farmall / IH / CASE”
Who is online
Users browsing this forum: No registered users and 1 guest