What is the easy way to make sure that the spark plug wires off of the magneto on a Farmall B are hooked up to the correct spark plug for the correct firing order?
I’m sure there’s an easy way to do this and I appreciate in advance your assistance.
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Firing order
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
Tractor Rod
- Cub Star
- Posts: 106
- Joined: Sun Dec 27, 2020 10:48 am
- Zip Code: 67357
Firing order
What is the easy way to make sure that the spark plug wires off of the magneto on a Farmall B are hooked up to the correct spark plug for the correct firing order?
I’m sure there’s an easy way to do this and I appreciate in advance your assistance.
-
Bill V in Md
- 10+ Years
- Posts: 1124
- Joined: Sun Feb 02, 2003 6:51 pm
- Zip Code: 21228
- Tractors Owned: 1948 Farmall Cub
LT1045 Cub Cadet - Circle of Safety: Y
- Location: MD, Catonsville
- Contact:
Re: Firing order
Not sure if you find this easy or not, but pages 21-24 in the below link are from the Farmall B Owners Manual. Diagrams in illustrations 8 & 9 allow you to cross reference the spark plug numbers in the engine block to the corresponding tower numbers on the magneto distributor cap. The firing order is listed as 1,3,4,2.
Farmall B Owners Manual p21-24.pdf- (194.15 KiB) Downloaded 320 times
Bill VanHooser
Cub 54 Blade, Cub 193 Moldboard Plow, Cub 28A Disc Harrow
Cub 54 Blade, Cub 193 Moldboard Plow, Cub 28A Disc Harrow
-
Tractor Rod
- Cub Star
- Posts: 106
- Joined: Sun Dec 27, 2020 10:48 am
- Zip Code: 67357
Re: Firing order
Worked perfectly. Thanks.
Who is online
Users browsing this forum: No registered users and 5 guests
