Hello,
I just joined the forum, because I bought my 1st tractor.....a Farmall 400. She's a little rough around the edges, but she runs decently well. She starts right up, but the hydraulics are pretty slow, and the bucket will only raise about 2/3 of the way up. I'm also looking for ideas/suggestions for how to convert her to 3-point. Thanks guys.
My first tractor, Farmall 400
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
Farmall400KS
- Posts: 2
- Joined: Mon Jul 27, 2020 10:01 am
- Zip Code: 67042
-
v w
- 10+ Years
- Posts: 1162
- Joined: Thu Jun 10, 2010 6:56 am
- Zip Code: 49053
- Circle of Safety: Y
- Location: Galesburg, MI
Re: My first tractor, Farmall 400
Welcome to the forum. I've never driven a 400 but have a lot of time on an M and super M which is what the 400 replaced. Nice and with quite a bit of power. Not having been around a 400 I know nothing about their hyd system. Three point conversions should be easy to find just ask a search engine. What are you going to use the 400 for? Vern
Return to “Farmall M, Super M, 400, 450, & 560”
Who is online
Users browsing this forum: No registered users and 0 guests
