Farmall f20 cam removal

Farmall F-xx Series Tractors, 1931-1939
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Posts: 2
Joined: Sat Nov 12, 2022 10:56 pm
Zip Code: 58782

Farmall f20 cam removal

Postby skovach » Sat Nov 12, 2022 11:06 pm

Hi can anyone give any direction as to how the camshaft comes out of this engine ? I don’t have a manual but have the timing cover off and the gear removed and the 3 bolts out of the cam under the gear but it only seems
To wanna move about 1/2” then stop when I lightly tap it . Anything else I need to do ? Thanks

Jim Becker
Team Cub
Team Cub
Posts: 17199
Joined: Sun Feb 02, 2003 2:59 pm
Zip Code: 55319
Circle of Safety: Y
Location: MN

Re: Farmall f20 cam removal

Postby Jim Becker » Sat Nov 12, 2022 11:23 pm

Did you take the rockers off and push the tappets up? If they are sitting on the cams, as soon as you start to move the shaft, adjacent cams start to collide with the tappets. You may have to do something to keep the tappets from falling back down (or falling out after the camshaft is removed).

Gary Dotson
Team Cub Mentor
Team Cub Mentor
Posts: 5597
Joined: Thu Aug 03, 2006 6:20 am
Zip Code: 43358
Tractors Owned: 48 Cub Diesel (Cubota)
53 Cockshutt 20 restored (Shooter)
52 Cockshutt 20 unrestored
47 Leader "B" (Herckie)
49 Leader "D" (Princess)
49 Leader "D" very rough
48 Leader "D" unrestored
Kubota B6200E
Kubota B6200HST
Kubota B8200HST-D
Circle of Safety: Y
Location: OH West Mansfield

Re: Farmall f20 cam removal

Postby Gary Dotson » Sun Nov 13, 2022 8:25 am

Also, if there is a fuel pump mounted to the side of the block, it will have to be removed.

Return to “Farmall F-xx Series”

Who is online

Users browsing this forum: No registered users and 2 guests