This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Cub Cadel 1238 Drive Belt Installation
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 3
- Joined: Mon Oct 08, 2007 9:44 am
Cub Cadel 1238 Drive Belt Installation
How do you get the lower drive belt over the pulley that drives the rear wheels...it seems like there is little or no room to slide that belt up and over the pulley..any ideas..thanks
-
- 10+ Years
- Posts: 949
- Joined: Mon Dec 08, 2003 6:15 am
- Location: PA Oakmont 15139
I don't know what a 1238 but it must be a newer lawn tractor and you may have to loosen the pins that keep the belt from staying engaged and you have to put the clutch pulley in last. This s for most any lawntractor.
The Geezer from IHregistry.com which crashed and is now Cub Cadet Collectors.
-
- 10+ Years
- Posts: 3
- Joined: Mon Oct 08, 2007 9:44 am
-
- 10+ Years
- Posts: 3
- Joined: Mon Oct 08, 2007 9:44 am
-
- 10+ Years
- Posts: 949
- Joined: Mon Dec 08, 2003 6:15 am
- Location: PA Oakmont 15139
If the pulley has 3 bolts I have taken out 2 and loosened the other to get belts on. Don't take out all three as you can't hold everything to get 1 bolt started(BTDT)
The Geezer from IHregistry.com which crashed and is now Cub Cadet Collectors.
Who is online
Users browsing this forum: No registered users and 1 guest